Garden Spas Heaters
Heaters must match your spa pack — and most “no heat” problems start with a dirty filter, so rule that out before buying parts.
Shop: Filters | Control System Parts | Circuit Boards | Jet Pumps | Plumbing
More Garden Spas: Control Panels & Topsides | Pillows | Jets | Lights | Valves & Diverters | Water Care | All Garden Spas Parts
Resources: Resource Center | Owner’s Manual & Parts Book
Showing all 4 resultsSorted by price: high to low
✅ Not Sure It Fits? Verify Before Ordering
Hot tub part compatibility can vary by spa brand, model, year, serial number, control system, and part revision.
To help us identify the correct replacement part, please send clear photos of:
- Your existing part label or sticker
- Your spa serial number sticker
- The equipment area or installation location (if accessible)
EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.
No Heat? Work the Ladder Before You Buy
Heaters get blamed for problems they didn’t cause. Before ordering anything, run this in order: pull the filter and run the spa without it — a clogged filter starves the heater of flow and is the single most common “broken heater” that isn’t. Check the breaker and GFCI. Look for error codes on the control panel. Only when flow is confirmed clean and the spa still won’t heat does the heater assembly — or a sensor — earn the blame.
If the filter test fixed it, the fix is a fresh filter, not a heater. Wisteria, Plume, and Forsythia take the EZ02 screw-in; the other six models take the EZ03 drop-in.
Matching a Garden Spas Heater
The heater lives inside the spa pack system, so it follows the same rule as every control part: match by your spa pack label. Garden Spas split between Balboa systems and some 2021–2022 Gecko spa packs, and heater assemblies, sensors, gaskets, and small heater accessories all follow the pack. A photo of the spa pack label plus your serial number sticker confirms the right part — whether you need the complete assembly or a small piece of it.
Replacing a heater means draining down — the perfect time to restock water care and start the refill with a clean filter, since dirty water is hard on a brand-new element.
Confirm Your Garden Spas Model
Azalea | Camellia | Forsythia | Hibiscus | Hydrangea | Iris | Plume | Viola | Wisteria
Why is my Garden Spa not heating?
Check the filter first — a dirty filter restricts flow and shuts heating down, and it’s the most common cause by far. Then check the breaker and GFCI, and look for error codes on the control panel. If flow is good and power is confirmed, the heater or a temperature sensor is the likely fault — send photos through the form and we’ll help pin it down.
How fast should a Garden Spa heat up?
A Garden Spa in good working order should gain roughly 0.5–1.0°F per hour, depending on a few factors — ambient air temperature and whether the cover is on being the big ones. A worn-out cover slows heating noticeably, since most heat escapes through the top. If your spa used to heat faster and now doesn’t, check the filter and the cover before suspecting the heater.
Do I replace the whole heater or just part of it?
It depends on what failed. Sensors, gaskets, and small heater parts can often be replaced individually, while a failed element usually means replacing the heater assembly. Send a photo of your spa pack label and the part in question and we’ll tell you the smallest fix that actually solves it.
Does a Garden Spas heater need to match Balboa or Gecko?
Yes. The heater is part of the spa pack system, so heaters, sensors, and related parts follow the pack brand. Match by your spa pack label — most Garden Spas are Balboa, some 2021–2022 spas are Gecko.