Balboa Heaters
Shop Balboa Heaters and Heater Assemblies
Balboa heater assemblies keep your spa at temperature by heating water as it passes through the heater tube mounted to your spa pack. When your spa won’t heat, heats slowly, or throws temperature-related error codes, the heater element — or the sensors attached to the heater tube — is one of the first places to look.
Common Balboa heater configurations include 4.0kW and 5.5kW assemblies, with variations in tube length, fitting style, and sensor placement. Some systems use M7 technology with sensors mounted directly in the heater tube, which changes which replacement assembly you need. Matching your exact system is the key step before ordering.
Shop Balboa Parts:
Spa Controls | Jet Pumps | Ozone | Back to Balboa Parts
Shop Balboa Spa Controls:
Circuit Boards | Spa Packs | Topside Controls
Shop Heaters by Spa Brand:
Artesian Elite | Island Spas | South Seas | Tropic Seas | Garden Spas | TidalFit | Cal Spas
Showing all 11 resultsSorted by price: high to low
Not 100% sure this is the correct replacement part? Use the fitment verification form below before ordering.
✅ Not Sure It Fits? Verify Before Ordering
Balboa heater compatibility can vary by spa pack model, heater wattage, tube length, fitting style, and sensor configuration.
To help us identify the correct replacement heater, please send clear photos of:
- Your existing heater assembly and its label if visible
- Your spa pack or control box label
- Your spa serial number sticker
EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.
How to Identify Your Balboa Heater
Before ordering, try to locate:
- Your spa pack model — the heater must match the pack (e.g., BP series vs. VS series)
- The heater wattage, commonly 4.0kW or 5.5kW
- The tube length and fitting size
- Whether your system uses M7 sensors mounted in the heater tube
On many Balboa systems the heater is sold as a complete assembly — tube, element, and sometimes sensors together — which is usually easier and more reliable than replacing the element alone.
No Heat? It Isn’t Always the Heater
No-heat conditions can be caused by the heater element, but also by flow problems, dirty filters, failed sensors, or a board relay that isn’t sending power to the element. FLO errors typically point to water flow or a flow/pressure switch rather than the element itself. OH (overheat) errors often trace to sensors or circulation. Ruling out flow and sensors first can save you from replacing a heater that was never bad.
Common Signs of a Failed Balboa Heater
- No heat with pumps running normally
- Breaker/GFCI trips when the heater kicks on — a classic sign of a shorted element
- Slow heating or temperature that can’t keep up in cold weather
- Visible leaking or corrosion at the heater tube