Artesian Jet – 5″ Whirlpool – Stainless Steel – Snap-In – 600 Series, 2007-2012
This Artesian Jet was common in Island Spas 2007-2012. OP03-1502-52 03-1502-52
When replacing jets, you don’t necessarily need to replace your current jet with the exact same jet that was there from the factory. The first thing that needs to line up is the diffuser (The backside of the jet that you can’t see when the jet is installed) the second thing you need to verify is the jet face will fit in the molding of the tub. (Example, some 4.5″ and 5″ jet faces may have the same diffuser, so all 5″ jets can be replaced 4.5″ jets, but not all 4.5″ jets can be replaced by 5″ jets, it depends on if there is enough space around the jet to accommodate the larger face.
Pro Tip: Keep water balanced to prevent jet diffusers from disintegrating. Low PH, over chlorinating/brominating and over shocking the water can all cause the plastics in jets to break down and become brittle.
✅ Not Sure It Fits? Verify Before Ordering
Island Spas parts vary by model, model year, trim and generation. Spas built during the 2025/2026 changeover may be current-generation or “Classic” carryover, so the model year alone does not settle it — match your spa pack label.
To help us identify the correct replacement, please send clear photos of:
- Your existing part, including any label
- Your spa serial number sticker
- Your spa pack / control system label
EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.
Reviews
There are no reviews yet.