MinnSpas | EZHotTubParts.com

Cal Spas Misc Parts

Cal Spas Misc Parts & Accessories

The Cal Spas parts that don’t fit a single family: filter housings and lids, heater pressure switches, control boxes, ozone generators, cover lift hardware and swim spa exercise kits. Many of these look generic but aren’t, so match by the part number or measurements of the one you’re replacing.

Shop: 75 sq ft Filter Housing | Filters | Heaters | Control Panels | Cover Lifts

More Cal Spas: Circuit Boards | Jet Pumps | Jets | Plumbing | Pillows | Lighting | All Cal Spas Parts

Resources: Cal Spas Resource Center | No-Heat Checklist (Cal Spas Heaters)

Showing all 19 resultsSorted by price: high to low

✅ Not Sure It Fits? Verify Before Ordering

Cal Spas small parts are matched by part number, size and connector type.

To help us identify the correct replacement, please send clear photos of:

  • The part you’re replacing, with any label or number
  • A tape measure across it, for housings and lids
  • Your spa’s serial number sticker

EZ Hot Tub Parts confirms fitment before you order, so you don’t pay return freight on a wrong part.

What You’ll Find Here

  • Filter housings and lids. Housings are sized by the filter they hold (50 or 75 sq ft) and by the style: drop-in or threaded. Match your filter first, then the housing. See the 75 sq ft Cal Spas filter housing.
  • Heater pressure switches. The small switch that tells the heater there’s enough flow. A bad one can stop a good heater. Heaters themselves are in Cal Spas Heaters.
  • Control boxes and ozone generators. Match the plug as well as the part: Cal Spas uses more than one connector type, and the plug has to fit your spa pack.
  • Cover lift hardware. Pivot arms and lift parts. Complete lifts are in Hot Tub Cover Lifters.
  • Swim spa exercise kits. Tether and exercise sets for Cal Spas swim spas, listed by spa length or model.

While You’re in There

If you’re opening the filter area, it’s a good time for a new Cal Spas filter and a filter cleaner. Orders over $99 ship free in the lower 48.

Cal Spas Misc Parts Frequently Asked Questions

Yes: filter housings and lids, cover lift hardware, exercise kits for swim spas, and more. Complete cover lifts are in Hot Tub Cover Lifters.

Match the housing to the filter it holds (50 or 75 sq ft) and its style, drop-in or threaded. Measure your old housing and send us a photo if you’re unsure. The 75 sq ft housing is the most common Cal Spas replacement we sell.

One common cause is the heater pressure switch, which shuts the heater off when it doesn’t sense enough flow. Check the filter and valves first, then the switch. The Cal Spas Heaters page walks through the full no-heat checklist.

Yes, tether and exercise kits for Cal Spas swim spas. Each listing names the spa length or model it was made for; match that to your swim spa.

Shopping Cart
Scroll to Top