MinnSpas | EZHotTubParts.com

Cal Spas Jet Pumps

Replacement jet pumps for Cal Spas hot tubs and swim spas, plus the cords, gaskets and split nuts that go with them. Match a pump by its motor label, not the spa: horsepower, one or two speeds, voltage, amps, frame size and plumbing size. The Cal Spas number (PUM…) on the label is the fastest way to the right one.

Shop: 2″ Pump Gaskets | 2-1/2″ Pump Gaskets | 2-Speed Pump Cords | ATS Pump | Circulation Pump Parts

More Jet Pumps: All Hot Tub Jet Pumps | Gecko Jet Pumps | Balboa Jet Pumps | Wet Ends & Pump Parts | All Cal Spas Parts

Resources: Cal Spas Resource Center | No-Heat Checklist (Cal Spas Heaters)

Showing all 14 resultsSorted by price: high to low

✅ Not Sure It Fits? Verify Before Ordering

Cal Spas jet pumps are matched by horsepower, speeds, voltage, amps, frame size and plumbing size, all printed on the motor label.

To help us identify the correct replacement, please send clear photos of:

  • The label on the pump motor (wipe it clean so the numbers can be read)
  • The whole pump from the side, showing the intake and discharge
  • The label on your control box (spa pack)

EZ Hot Tub Parts confirms fitment before you order, so you don’t pay return freight on a wrong part.

Reading the Pump Label

  • Speeds. A 2-speed pump runs low for filtering and high for the jets, and its label lists amps for both (for example 12 amps high, 4.4 amps low). A 1-speed pump lists one. Replace a 2-speed with a 2-speed so the control box can still run both.
  • Voltage and amps. The Cal Spas jet pumps here are 230/240V. Match the amps as well as the horsepower; the amp rating is what the control box is built to handle.
  • Frame. Most Cal Spas jet pumps use a 56 frame motor. The frame sets the mounting footprint, so a different frame may not bolt down in the same spot.
  • Plumbing. Most use 2" intake and discharge with union fittings. Use new 2" flat gaskets (or 2-1/2" on larger pumps) whenever you open a union.

Older Pumps and the ATS Pump

Discontinued GE motors. Older Cal Spas pumps built on the GE motor 5KCR39UN6050AX can’t be bought new as the same part. The 5KCR39UN6050AX best-fit replacement is the closest match we’ve found for those spas.

ATS therapy seat. Cal Spas with the Adjustable Therapy System have a separate pump for that seat. It’s the ATS pump (1-speed, 240V, 56 frame), and it runs through its own ATS control box that links the ATS panel and the pump. The ATS panel itself is in Cal Spas Control Panels.

Pump not starting at all? Check the breaker, the pump’s cord at the control box and the control box itself before you replace the motor. Orders over $99 ship free in the lower 48.

Cal Spas Jet Pump Frequently Asked Questions

Read the label on the motor. It shows the horsepower, speeds, voltage, amps and frame, and often a Cal Spas PUM number. Send us a photo of the label and the whole pump and we’ll confirm the replacement.

Yes, if it matches on speeds, voltage, amps, frame and plumbing size. That’s why this page includes pumps like the Gecko 2-speed, 230V, 12 amp, 56 frame pump with 2" plumbing. See all hot tub jet pumps for more.

Seals, impellers and wet ends come from the pump’s maker, not from Cal Spas. Look for the maker’s name on the front half of the pump (the wet end). Gecko parts are in Wet Ends, Impellers & Pump Parts; for others, send us a photo and we’ll find the match.

That GE motor is discontinued. The 5KCR39UN6050AX best-fit replacement pump is the closest current match. Send us a photo of your pump if you want us to check it first.

Only if the old cord is damaged or doesn’t match the new pump’s speeds. A 2-speed pump needs a 2-speed cord. Check the plug at the control box when you order.

Shopping Cart
Scroll to Top