MinnSpas | EZHotTubParts.com

Cal Spas Circuit Board

Cal Spas Circuit Boards

Replacement circuit boards and complete spa packs for Cal Spas hot tubs and swim spas, including the CS6200, CS6300DV, CS9800, CSBP501X and Cal Spas ELE boards. Many Cal Spas boards are Balboa boards under a Cal Spas name, and the label often shows both numbers (the CSBP501X is Balboa 56568-04). Match by the number on the board’s label, not by the year of your spa.

Shop: CSBP501X Spa Pack | Cal Connect (Wi-Fi / Alexa) | Control Panels | Heaters | Heater Jumper Wires

More Boards: Balboa Circuit Boards | Balboa Spa Packs | Gecko Spa Packs | All Cal Spas Parts

Resources: Cal Spas Resource Center | No-Heat Checklist (Cal Spas Heaters)

Showing all 11 resultsSorted by price: high to low

✅ Not Sure It Fits? Verify Before Ordering

Cal Spas circuit boards are matched by board number, control system and the panel it talks to.

To help us identify the correct replacement, please send clear photos of:

  • The label on the circuit board inside the control box (turn the power off at the breaker first)
  • The label on the outside of the control box
  • The back of your control panel, showing its part number

EZ Hot Tub Parts confirms fitment before you order, so you don’t pay return freight on a wrong part.

Which Cal Spas Board Do I Have?

With the power off at the breaker, open the control box and find the label on the board. Cal Spas boards carry a Cal Spas name or ELE number, and Balboa-made boards also show Balboa’s number. Either one gets you to the right replacement.

  • CS6200 and CS6300DV: Cal Spas boards used across many series. Match the exact name on the label; the two are not interchangeable.
  • CS9800: a separate board family with its own panels. Match the label.
  • CSBP501X (ELE09907296, Balboa 56568-04): a Balboa BP board. It’s offered as the board alone, as a refurbished board, or as a complete spa pack with the board already in its box. BP boards work with Balboa TP panels and Spa Touch screens.
  • Cal Spas spa packs such as the MSEZ-95065 (used in 2017 to 2020 Cal Spas): the whole control box, for when more than the board has failed.

Cal Spas also builds spas on Gecko and Waterway NEO controls in the same years. Those use different boards, so check the control box label before you order.

Board, Panel or Something Else?

A dark or scrambled panel, or a spa that won’t heat, isn’t always the board. The control panel, its cable, a heater connection or a tripped breaker can cause the same symptoms. Note any error message on the panel and send it to us with photos of the board label; it helps us find the failed part before you spend money on a board. If you’re replacing the board, check the heater jumper wires for heat damage at the same time.

Adding app or voice control? The Cal Connect module works with Cal Spas Balboa controls. Orders over $99 ship free in the lower 48.

Cal Spas Circuit Board Frequently Asked Questions

Turn off the power at the breaker, open the control box and read the label on the board. Send us a photo of it, plus the control box label and the back of your control panel, and we’ll confirm the replacement.

Yes. The CSBP501X (Cal Spas ELE09907296) is Balboa’s 56568-04 board under a Cal Spas name. It works with Balboa TP control panels and Spa Touch screens.

If only the board has failed, the board is enough. If the box, relays or terminals are damaged too, or the spa pack is very old, a complete spa pack replaces it all at once. Send us photos and we’ll help you decide.

It’s a lower-cost way to replace the same board. Check the listing for its details before ordering, and match the board number exactly as you would for a new one.

Common signs are a dark or frozen panel, error messages that don’t clear, or pumps and heater that won’t turn on. The panel, its cable or the heater can cause the same signs, so check those and send us photos before ordering. For heat problems, start with the no-heat checklist.

Shopping Cart
Scroll to Top