MinnSpas | EZHotTubParts.com

TidalFit Swim Jets & Exercise Equipment

TidalFit swim jets and exercise equipment are the parts no other spa brand carries — swim jet nozzles and wall fittings, swim tethers, rowing kits and stainless grab bars — matched by your swim system and model, not by year alone.
Shop: Jets | Jet Pumps | Control System Parts
More TidalFit: Pillows | Filters | Misc Parts | All TidalFit Parts | Resource Center & Manuals

Showing all 3 resultsSorted by price: high to low

TidalFit Swim Jets & Exercise Equipment — Match by Swim System

Swim jets first. TidalFit used several swim systems over the years, and the jet hardware follows the system: the dual Badu swim jet configuration of the early manuals, the “Old Faithful” and OVO swim jets of the 2010–2018 books, and the Power Stream swim jets with a 1 inch nozzle and stainless escutcheon from 2018 on, fed through clear nozzle wall fittings. The EP-16 added a variable-frequency swim speed control in 2016; the Variable Flow Swift Water Trainer (2020 manual) put a variable-speed pump drive behind a NEO touchscreen with numbered swim speeds and timed workouts; and the WaVS system (2023 manual) runs on the Gecko keypad with a four-step swim speed bar and countdown workouts. Tell us which system you have and the nozzle, wall fitting or control part sorts itself out.

Exercise equipment is the section of the TidalFit parts books no other Artesian brand has: the SwimTether and its stainless Pro base (which replaced the earlier Superswim tether), the exercise pool rowing kits (the later Row Kit replaced the original Exercise Pool Row), 316 stainless grab bar handrails, and the resistance band sets. Mounting hardware is model-specific, so photograph your anchor points before ordering a tether or rowing kit for a spa that never had one.

Visit the TidalFit Swim Spa Resource Center for part guides and troubleshooting, or download your TidalFit Owner’s Manual.

TidalFit Swim Jets & Exercise Equipment FAQs

In order of appearance: a dual Badu swim jet setup shown in the 2012 manual; the Old Faithful and OVO swim jets of the 2010–2018 books; a variable-frequency swim speed control on the EP-16 (2016 manual); the Variable Flow Swift Water Trainer with its NEO2100 pack, NEO touchscreen and Power Defender variable-speed pump (2018–2021 books, 2020 manual); and the WaVS variable-speed system on the Gecko in.k1000+ keypad (manual published 2023) — ordering WaVS is what puts Gecko controls in a TidalFit. The swim jet nozzles and wall fittings listed here fit the Power Stream generation.

A tether system that holds a swimmer in place against the swim current: the SwimTether (12-0000-42) with the stainless SwimTether Pro base (12-0000-42B), listed in the 2019–2021 books as the successor to the Superswim tether. It fits exercise pools and the swim side of Dual Temp models with the factory anchor points; photograph your anchor location and we’ll confirm before you order.

Yes, if your model has the mounting points. The books list the Exercise Pool Row (12-0001-42, 2014–2018) and the later Exercise Row Kit (12-0015-42, 2019–2021); the kit includes the resistance hardware that attaches at the swim end. Send your serial number and a photo of the swim end of the pool and we’ll confirm fitment.

From the Gecko keypad’s main screen, the WaVS button starts the swim pumps and a speed bar across the bottom of the screen sets them in quarters — 25, 50, 75 or 100 percent of maximum. Swim workout programs add a countdown so you can get into position, then step through the speeds for the set time. The keypad can be put to sleep during a session so splashing doesn’t stop it.

The Superswim 2-part tether (12-0002-42) and its Pro base (12-0002-42B) appear in the 2014–2018 books and are no longer factory-listed; the SwimTether and SwimTether Pro base are the current equivalents. If your old tether carries the Superswim number, send a photo of the base and anchor and we’ll confirm the swap.

The Power Stream swim jet is a 1 inch nozzle assembly (clear, or with the stainless escutcheon) that seats in a clear nozzle wall fitting; the 2018–2021 books list both. If the nozzle body is cracked, replace the nozzle; if the wall fitting behind it is damaged, that’s the separate wall-fitting part. A photo with the nozzle removed tells us which.

✅ Not Sure Which Swim System Part Fits? Verify Before Ordering

TidalFit swim jet and exercise equipment compatibility varies by swim system (Badu, Power Stream, Swift Water Trainer or WaVS), model, model year and anchor hardware.

To help us identify the correct replacement, please send clear photos of:

  • The swim jet nozzle and wall fitting
  • Your swim system control screen or panel
  • The tether, rowing or grab bar anchor points
  • Your spa serial number sticker

EZ Hot Tub Parts can confirm fitment before you order and help you avoid costly returns.

Shopping Cart
Scroll to Top