Island Spas Aftermarket Circuit Board – HydroQuip/Balboa Universal Replacement (2018–2024)
A dead Island Spa doesn’t have to wait on a factory board. This aftermarket replacement circuit board is the HydroQuip/Balboa BP501U universal board, and it ships direct from HydroQuip. It costs less than the OEM Island Spas board and is set up for your spa when it’s installed.
Prefer the factory original? View the OEM Island Spas Circuit Board.
Aftermarket vs. OEM Island Spas Board
- This aftermarket board: Balboa’s universal BP501U. Ships fast from HydroQuip and costs less. It does not arrive programmed for your spa; you set it up during installation with the included wiring diagram and replacement guidelines sheet.
- OEM Island Spas board: the factory board your spa was built with. Higher price, and it ships from the spa manufacturer, so timing depends on their stock.
Compatibility & Installation
This is a universal Balboa BP501U board, not a factory-matched Island Spas board.
- ⚠ Balboa systems only. The redesigned 2025–2026 Island Spas switched to Gecko controls; this board does not fit a Gecko-equipped spa.
- ⚠ Minor wiring adjustments may be required in some installations.
- ⚠ Your topside control must be compatible with your existing system. The board works with Balboa TP-series topsides.
- ⚠ 2013–2017 Island Spas: this board will NOT fit inside the original plastic mounting box. Those spas need the complete Island Spas spa pack.
- The 120V St. Kitts uses its own pack: St. Kitts Spa Pack – 120V.
- Shut off the breaker before opening the spa pack. If 240V wiring isn’t in your comfort zone, have a qualified spa technician do the swap.
Signs Your Circuit Board Has Failed
The topside is blank or won’t respond, the spa won’t heat, or a pump or light is stuck on or off. Rule out the breaker, GFCI and heater first; power surges and moisture in the equipment bay are common board killers.
What’s in the Box
One BP501U universal circuit board, a wiring diagram, and a circuit-board replacement guidelines sheet. Not included: the enclosure, heater, topside control or any add-on daughter board. The factory Artesian Island Spas daughter board (33-1810-08) works with this board, so your existing daughter board moves over.
Replacement Information
Aftermarket alternative to the factory board used on 2018–2024 Balboa-equipped Island Spas. Tropic Seas spas use the same factory board; see the Tropic Seas aftermarket board and the Tropic Seas OEM board.
Related Parts
- OEM Island Spas Circuit Board (Factory Original)
- Island Spas Complete Spa Pack (heater, circuit board, mounting box)
- Balboa BP501U Universal Circuit Board Kit (non-brand listing)
The manufacturer reserves the right to make production changes. Boards may vary slightly in appearance while keeping the same function.
✅ Not Sure It Fits? Verify Before Ordering
Hot tub part compatibility can vary by spa brand, model, year, serial number, control system, and part revision.
To help us identify the correct replacement part, please send clear photos of:
- Your existing part label or sticker
- Your spa serial number sticker
- The equipment area or installation location (if accessible)
EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.
Frequently Asked Questions
33-59375-K HQ-33-59375-K IS-HQ-33-59375-K 59375 BP501U BP501-U BP501UX MBP501UX 33-1801-08CB OP33-1801-08CB IS-OP33-1801-08CB 56483 56488 56585 56944 56961 56965 hydroquip balboa universal circuit board island spas aftermarket
Own an Island Spa?
Looking for more parts, filters, or help identifying the right replacement? Visit our full Island Spas Owner Resource page to browse parts by category, model, and year.
Browse Island Spas Parts & Owner Resource Page





Reviews
There are no reviews yet.