Artesian Platinum Elite 2″ Light Housing with Gasket
This 2″ light housing with gasket replaces a cracked, cloudy or leaking 2″ light housing on an Artesian Platinum Elite hot tub. The housing is the clear fitting that seals through the shell; the light sits behind it.
Platinum Elite lighting uses 2″ and 5″ housings. Measure across the lens face of the light you’re replacing, and compare it with the product photo before ordering.
Find Your Parts: Artesian Elite & Platinum Elite Light Parts | Platinum Elite Parts
What’s in the box
One 2″ light housing with its gasket. The LED light, its cord, and any daisy-chain connectors are not included.
Installation notes
Turn the spa off at the breaker. Lower the water below the light, unplug and set aside the LED from the back of the housing, then remove the old housing. Clean the shell where the gasket seats, install the new housing, reinstall the LED, and check for drips after refilling.
Same housing, other Artesian-built spas
This same housing is listed under each Artesian-built brand: Artesian Elite | Island Spas | Tropic Seas Spas | TidalFit Swim Spas | Garden Spas | South Seas Spas
35-0028-30 350028-30 3500283 631-1060 6311060 57-850-1072 artesian platinum elite 2 inch light housing with gasket rising dragon spa light lens housing
✅ Not Sure It Fits? Verify Before Ordering
Send a photo of the light you’re replacing (front with a tape measure across the lens, and the back with the LED), plus your spa serial number sticker, and we’ll confirm the correct housing before you order.
Platinum Elite 2″ Light Housing FAQs
It’s the 2″ housing, used by the lights that measure about 2″ across the lens face. Larger lights on Platinum Elite spas use a 5″ housing, which is a different part.
Usually, if the LED still works and wasn’t damaged by water. The housing doesn’t include an LED. If you’re not sure your LED fits this housing, send a photo of the back of the light first.
Yes. Both carry Artesian part number 35-0028-30 (lens maker number 631-1060). We list it under each Artesian brand so you can find it by your spa.
From EZ’s own stock, so it doesn’t wait on Artesian’s parts backlog.





Reviews
There are no reviews yet.