MinnSpas | EZHotTubParts.com

Island Spas Light Housing – 2″ with Gasket

$17.99

Fits: Island Spas hot tubs with a 2″ light housing (Island uses 2″ and 3-1/2″ housings; measure across the lens face). Replacement housing with its gasket, shipped from EZ’s own stock.

Not sure? Send us a photo and we’ll confirm it fits.

- +
⭐⭐⭐⭐⭐ 4.9/5 Google Rating
Guaranteed Safe Checkout

🚚 How fast will this ship? 59% of Artesian parts ship within 2 business days.

Island Spas 2″ Light Housing with Gasket

If your Island Spas light has a cracked face, a cloudy lens, or water sitting inside it, the housing is the part to replace. This 2″ light housing with gasket is the clear fitting that seals through the shell and holds the light behind it.

Island Spas uses two housing sizes, 2″ and 3-1/2″. Measure straight across the lens face of the light you’re replacing; this listing is the 2″ size.

Find Your Parts: Island Spas Light Parts | All Island Spas Parts

What’s in the box

One 2″ light housing and its gasket. The bulb or LED and its cord are not included.

Installation notes

Shut the spa off at the breaker. Lower the water below the light, then remove the old housing from the shell. Clean the shell surface where the gasket seats so it seals flat, install the new housing, and check for drips behind it after refilling. If the back of the light is hard to reach, a spa technician can make the swap.

Same housing, other Artesian-built spas

Island Spas are built by Artesian Spas, and this same housing is listed under each of its brands: Artesian Elite | Artesian Platinum Elite | Tropic Seas Spas | TidalFit Swim Spas | Garden Spas | South Seas Spas

35-0028-30 350028-30 3500283 631-1060 6311060 57-850-1072 island spas 2 inch light housing with gasket rising dragon spa light lens housing

✅ Not Sure It Fits? Verify Before Ordering

Send a clear photo of your Island Spas light with a tape measure across the lens face, plus your serial number sticker, and we’ll confirm the correct housing before you order.


Island Spas 2″ Light Housing FAQs

Measure across the lens face. About 2″ is this housing; about 3-1/2″ is the larger housing, a different part. A photo with a tape measure through the form above settles it.

Yes. Water inside means the housing or gasket is no longer sealing. Replace it before the bulb shorts out or the leak reaches the cabinet.

Yes. The housing comes with its gasket. The bulb or LED is a separate part.

Artesian lists it as 35-0028-30. The lens maker’s number is 631-1060.

Weight 0.9 lbs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top