Genuine Balboa VL200 Topside Control Kit — 4 Button (Jet · Jet · Temp · Light) — Small Bezel
This is the complete kit: the genuine Balboa VL200 duplex LCD mini-oval topside control with the Jet / Jet / Temp / Light overlay (Balboa 80-11127) — ready to plug into Balboa VS and GS series spa packs.
How to know this is your panel
Balboa’s oval panels look alike — the giveaway is the bezel size. The VL200 is the Small Bezel: the panel face measures 4-3/8″ × 1-5/8″. If yours is bigger, you have the Medium Bezel VL240 (5-1/4″ × 1-15/16″) or the Large Bezel VL260 (7″ × 2-1/8″). Then match the buttons: Jet, Jet, Temp, Light — two jet buttons — with an LCD display. Not sure? Send us a photo and we’ll confirm before it ships.VL200 VL-200 mini oval 34-52312-K 52312 G8220 G-8220 58-138-3313 55472 58-138-1332 80-11127 11127 80-11127-K 58-138-1318 duplex
What’s in the box
The genuine Balboa VL200 topside control and the 4-button Jet/Jet/Temp/Light overlay — one complete kit, nothing else to hunt down.
Easy to install: with the spa powered off, unplug the old panel from the circuit board, plug in the new one, and apply the overlay with its adhesive backing.
Replacing a larger panel? A Topside Adapter Plate is available to cover the old cutout.
*Manufacturer reserves the right to make production changes in color and overlay design. Actual product received may vary slightly but the functionality remains the same.
✅ Not Sure It Fits? Verify Before Ordering
Send clear photos of your current control panel (front, showing the buttons), your spa pack label, and a tape measure across the panel face and we’ll confirm the correct replacement before you order.
Balboa VS and GS series spa packs — the VL200 plugs straight into the circuit board’s topside connector. We confirm the exact fit from a photo of your spa pack label before it ships.
Measure the panel face. Small Bezel (VL200) is 4-3/8″ × 1-5/8″, Medium Bezel (VL240) is 5-1/4″ × 1-15/16″, and Large Bezel (VL260) is 7″ × 2-1/8″. They look identical in photos — the measurement is what tells them apart.
Yes — every topside control we sell is a complete kit with the overlay included. This one comes with the Jet / Jet / Temp / Light overlay (Balboa 80-11127), so it arrives ready to install.
Yes — if your panel works and only the printed overlay is worn, order the VL200 Jet/Jet/Temp/Light overlay by itself.
Balboa has produced this panel with different trim colors over the years, and the manufacturer reserves the right to make production changes in color and overlay design. The panel you receive may vary slightly in appearance, but the fit and functionality are identical.
Yes. With the spa powered off, unplug the old control from the circuit board, plug in the new one, and apply the overlay. No special tools required.
Reviews
There are no reviews yet.