Genuine Balboa VL260 Topside Control Kit — 4 Button (Jets · Jets · Temp · Light) — Large Bezel
This is the complete kit: the genuine Balboa VL260 / MVP260 duplex LCD topside control with the Jets / Jets / Temp / Light overlay (Balboa 80-11725) — ready to plug into Balboa VS and GS series spa packs.
How to know this is your panel
Balboa’s oval panels look alike — the giveaway is the bezel size. The VL260 is the Large Bezel: the panel face measures 7″ × 2-1/8″. If yours is smaller, you have the Small Bezel VL200 (4-3/8″ × 1-5/8″) or the Medium Bezel VL240 (5-1/4″ × 1-15/16″). Then match the buttons: Jets, Jets, Temp, Light — two jet buttons — with an LCD display. Not sure? Send us a photo and we’ll confirm before it ships.VL260 VL-260 MVP260 MVP 260 34-55049-K 34-55050-K 34-55051-K 55049 55049KIT 58-138-4235 G8226 G-8226 58-138-3414 53646 53999 80-11725 11725 59-138-2000 duplex oval
What’s in the box
The genuine Balboa VL260 topside control and the 4-button Jets/Jets/Temp/Light overlay — one complete kit, nothing else to hunt down.
Easy to install: with the spa powered off, unplug the old panel from the circuit board, plug in the new one, and apply the overlay with its adhesive backing.
*Manufacturer reserves the right to make production changes in color and overlay design. Actual product received may vary slightly but the functionality remains the same.
✅ Not Sure It Fits? Verify Before Ordering
Send clear photos of your current control panel (front, showing the buttons), your spa pack label, and a tape measure across the panel face and we’ll confirm the correct replacement before you order.
Balboa VS and GS series spa packs — the VL260 plugs straight into the circuit board’s topside connector. It’s also the panel style used on many MVP260-equipped spas. We confirm the exact fit from a photo of your spa pack label before it ships.
Measure the panel face. Small Bezel (VL200) is 4-3/8″ × 1-5/8″, Medium Bezel (VL240) is 5-1/4″ × 1-15/16″, and Large Bezel (VL260) is 7″ × 2-1/8″. They look identical in photos — the measurement is what tells them apart.
Yes — every topside control we sell is a complete kit with the overlay included. This one comes with the Jets / Jets / Temp / Light overlay (Balboa 80-11725), so it arrives ready to install.
Yes — if your panel works and only the printed overlay is worn, order the VL260 Jets/Jets/Temp/Light overlay by itself.
Balboa has produced this panel with white, gray, and clear trim over the years, and the manufacturer reserves the right to make production changes in color and overlay design. The panel you receive may vary slightly in appearance, but the fit and functionality are identical.
Yes. With the spa powered off, unplug the old control from the circuit board, plug in the new one, and apply the overlay. No special tools required.
Reviews
There are no reviews yet.