Current OEM Circulation Pump for Tropic Seas Spas
This is the current OEM factory-recommended circulation pump for most Tropic Seas Spas. It replaces several earlier Artesian circulation-pump versions and is the best default choice when the equipment compartment has enough clearance.
Important fitment note: Some pre-COVID and early-2020s Tropic Seas Spas were built with a physically shorter circulation pump. In a tight equipment bay, the rear motor bell of the current OEM pump may sit very close to—or rub against—the rear motor bell of a neighboring jet pump. When clearance is limited, choose one of the compact options instead.
Size & cord: This pump is about 11.5″ long, measured from the start of the threaded intake to the end of the motor. It comes with a cord.
From our service techs: When this pump replaces the discontinued Balboa circulation pump, we usually have to remove the screws holding the spa pack down and slide the pack over to make room. Even then, the rear of this pump usually rubs against the rear of the jet pump. Our compact replacement is about 2″ shorter.
Why choose the current OEM pump?
- Factory-recommended current replacement
- OEM fit and performance for most installations
- 1-year warranty
- Recommended when the original pump size and available clearance are not unusually tight
EZ’s Pro Tip: Replace both 1.5-inch flat gaskets whenever replacing a circulation pump.
Which Tropic Seas circulation pump should I choose?
| Option | Best use | Warranty |
|---|---|---|
| Current OEM factory replacement | Factory-recommended replacement for most Tropic Seas Spas | 1 year |
| Compact replacement | Tight equipment bays or spas that originally used a smaller pump | 1 year |
| Smallest OEM compact option | Maximum clearance and direct replacement of the small Laing/Goulds-style pump | 1 year |
| Gecko Circ-Master | Premium, long-proven design when the equipment bay has adequate room | 2 years |
Current page: Current OEM factory replacement
Reviews
There are no reviews yet.