Island Spas Gecko heat.wav 5.5kW Heater
This 240V, 5.5kW Gecko heat.wav heater is the replacement option for compatible Island Spas hot tubs equipped with a Gecko in.yE-3 or in.yE-5 spa control system. It can replace the 4.0kW heat.wav heater used with these systems.
The in.yE-3 and in.yE-5 use the same wafer board/PCB and heater relays. Proper operation requires using the correct wiring configuration and selecting the appropriate LL programming for the spa’s GFCI breaker size and complete equipment configuration.
- Heater output: 5.5kW
- Voltage: 240V
- Compatible systems: Gecko in.yE-3 and in.yE-5
- Gecko heater part number: 9920-101449
- Model number: Heat.WAV-XE-5.5-240-2-INC-IF-T PURC
- Artesian Spas part number: OP24-2110-40
Island Spas Gecko 5.5kW Heater FAQs
This heater is used with Island Spas hot tubs equipped with a Gecko in.yE-3 or in.yE-5 control system. Confirm that your spa uses one of those Gecko systems and compare the label on your existing heater with part number 9920-101449 before ordering.
The Gecko part number printed on the heater is 9920-101449. The complete model number is Heat.WAV-XE-5.5-240-2-INC-IF-T PURC. The Artesian Spas ordering number is OP24-2110-40, and dealer-portal searches for 24-2110-40 will locate it.
Yes. This 5.5kW heater can replace the 4.0kW heat.wav heater used with Gecko in.yE-3 and in.yE-5 systems. The control system must be wired correctly and programmed with the proper LL configuration for the spa’s GFCI breaker size and equipment configuration.
The LL configuration tells the Gecko control system which electrical and equipment configuration it should use. The correct LL setting for the spa’s wiring, equipment and GFCI breaker size allows the system to manage the heater and pumps within the available electrical capacity.
Confirm that the spa uses a Gecko in.yE-3 or in.yE-5 control system, then compare the existing heater label with Gecko part number 9920-101449 and model Heat.WAV-XE-5.5-240-2-INC-IF-T PURC.
Reviews
There are no reviews yet.