Replaces Artesian part 08-0017-18 (check valve, 1.5 lb spring, 1-1/2 inch slip). Artesian no longer ships the 1-1/2 inch valve. It now fills that part number with a 2″ x 2″ slip check valve plus two 2″ x 1-1/2″ reducer bushings, one for each end. This kit gives you all three pieces, so the new valve glues into the same 1-1/2 inch pipe as the old one.
Fits: Artesian spas that used check valve 08-0017-18, documented in the Artesian Platinum Elite factory parts books 2013–2018 and Artesian Elite factory parts books 2019–2021, and listed in Artesian’s current (2026) factory parts catalog.
What’s in the Kit
- 1 × check valve, 2″ slip x 2″ slip, 2 lb spring
- 2 × PVC reducer bushings, 2″ x 1-1/2″ (one per side)
Before You Install
- It’s longer than the old valve. With a bushing on each end, the assembly takes up more pipe length than the original 1-1/2 inch valve. Measure your space; you may need to cut back the pipe a little.
- Heavier spring. The replacement uses a 2 lb spring instead of the original 1.5 lb. This is the valve Artesian supplies for this position.
- Glue it the right way round. Match the flow arrow on the valve body to the direction of water flow, the same as the valve you’re removing.
08-0017-18 OP08-0017-18 Artesian Elite Platinum Elite Check Valve 1.5 lb Spring 1-1/2 Inch Slip Valve Check 1.5LB 1.5 in.S
✅ Not Sure It Fits? Verify Before Ordering
Artesian parts vary by model, model year, trim and generation. The Platinum Elite line became Artesian Elite for 2019, and many parts carried over between generations — so the name on the cabinet alone does not settle it. Match your spa pack label and the part you are removing.
To help us identify the correct replacement, please send clear photos of:
- Your existing part, including any label
- Your spa serial number sticker
- Your spa pack / control system label
EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.





Reviews
There are no reviews yet.