Master Spas Clarity Control Panel — Complete, Ready to Install
This is the complete control panel for Master Spas Clarity series spas: the genuine Balboa TP600 topside control and the genuine Master Spas Clarity overlay, together in one box. Master Spas sells the TP600 bare, without the button-and-label overlay. This kit includes it, so you install once and the panel reads like the factory original.
What’s in the box?
- 1 × Balboa TP600 topside control (LCD panel with cable)
- 1 × Master Spas Clarity TP600 overlay (adhesive back)


Fits
- Master Spas Clarity series, 2013–2023: CLS 1055, CLS 855L, CLS 855, CLS 738L, CLS 738, CLS 730L, CLS 730, CLS 524, Precision 8, Precision 7, Precision 67, Balance 9, Balance 8, Balance 7, Balance 6
- Control system: Balboa BP series — the TP600 does not work on older Balboa VS/GS systems
- Panel: TP600 face, 7-1/8″ × 3-1/2″; 6 buttons reading Jets, Aux, Flip down the left and Warm, Light, Cool down the right, with the Clarity Spas logo above the display
Common Symptoms
- Buttons don’t respond, or only some of them work
- Blank, dim or garbled display
- Communication error on the panel after the board checks out
Only the overlay worn or faded and the buttons still work? The Clarity TP600 overlay on its own is also available. Own a Legacy Whirlpool? See the Legacy control panel.
Easy to install: with the power to the spa off at the breaker, pry off the old topside and clean the surface. Open the equipment area, unplug the old topside from the circuit board and plug in the new one. Stick the panel in place, apply the overlay, then turn the power back on.
*Manufacturer reserves the right to make production changes in color and overlay design. Actual product received may vary slightly but the functionality remains the same.
Own a Master Spa? Browse filters, pumps, heaters and more on our Master Spas Parts page.
X310191 33-1503-08 TP600U X509101 TP600 TP-600 55676 34-55676-K G8460 Clarity overlay Master Spas topside CLS 1055 855 738 730 524 Precision Balance BP series balboa
✅ Not Sure It Fits? Verify Before Ordering
Hot tub part compatibility can vary by spa brand, model, year, serial number, control system, and part revision.
To help us identify the correct replacement part, please send clear photos of:
- Your existing part label or sticker
- Your spa serial number sticker
- The equipment area or installation location (if accessible)
EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.
A genuine Balboa TP600 topside control (the same panel as Master Spas X310191) and the Master Spas Clarity overlay (X509101), so the panel reads like the factory original.
Clarity series spas built 2013 to 2023 with the Balboa TP600 topside, including the CLS 1055, 855, 738, 730 and 524 and the Precision and Balance models.
Yes, both use the same Balboa TP600 topside. Only the overlay differs, so order the kit for your series: Clarity here, or the Legacy control panel.
Yes. If only the overlay is worn or faded, the Clarity TP600 overlay is sold on its own.
A blank or unresponsive panel can be either. If the spa still heats and runs its filter cycles, the topside is the more likely cause. Send us a photo of the panel and your spa pack label and we’ll help you sort it out before you order.
No. The spa’s settings live on the circuit board. Plug the TP600 in and it reads the board’s configuration; you may need to set the time and temperature again.
Turn the power off at the breaker, pry off the old topside and clean the surface. Unplug the old topside from the circuit board and plug in the new one, stick the panel in place, apply the overlay, then turn the power back on.





Reviews
There are no reviews yet.