MinnSpas | EZHotTubParts.com

Dimension One Circulation Pump – 230V, 3/4″ Barb, 19″ Cord – Laing E10 Replacement

$344.99

Fits: Dimension One spas with a 230V Laing E10 circulation pump on 3/4″ barbed ports and a short 19″ cord, no flow switch.

Common symptoms: No heat, a flow error, or a circ pump that’s quiet, humming or grinding.

Compatibility: Dimension One has used more than one circ pump. Match your old pump’s label (Laing E10, 230V), its barbed fittings and its cord connector.

Key specs: 230V · 50/60 Hz · 1 speed · 3/4" barb · 19" cord · no flow switch

Not sure? Send us a photo of your pump label and we’ll confirm it fits.

- +
⭐⭐⭐⭐⭐ 4.9/5 Google Rating
Guaranteed Safe Checkout

🚚 How fast will this ship? 95% of Balboa, Gecko & Waterway parts ship within 2 business days.

Need it overnighted? Read this first

Dimension One Circulation Pump – 230V, 3/4″ Barb, 19″ Cord – Laing E10 Replacement

Shop: Dimension One Circulation Pumps | Dimension One Filters | Dimension One Parts

The circulation pump in your Dimension One keeps water moving through the filter and heater on a 24-hour cycle. On D1 spas fitted with the small Laing E10, this is the replacement for Dimension One part 01512-321: 230V, 3/4″ barbed intake and discharge, and the short 19″ cord D1 used. Match it to the label on the pump you’re replacing, not to the spa model name.

Compatibility & Installation

Dimension One has used more than one circulation pump. Before you order, confirm your old pump is a Laing E10, reads 230V, has 3/4″ barbed ports (hose pushed over ridged nipples and clamped) and has no flow switch built into the pump. If your E10 has a built-in flow switch (D1 01512-320E), you need the flow-switch version instead. If your circ pump has big 1-1/2″ unions, you need our Dimension One long-thread circulation pump.

Specifications

  • Pump: Laing E10 circulation pump
  • Voltage: 230V, 50/60 Hz
  • Speeds: 1 speed, continuous duty
  • Intake / discharge: 3/4″ barb
  • Cord: 19″ cord, attached
  • Flow switch: none

What’s in the Box

One Laing E10 circulation pump with a 19″ cord. Hose and clamps are not included; reuse the ones on your old pump, or replace them if they’re cracked or rusted.

Common Symptoms of a Failing Circulation Pump

  • Spa won’t heat
  • Flow error on the display
  • Pump hums but the water isn’t moving
  • Grinding or whining noise
  • Moisture or a drip at the pump

Replacement Information

Replaces Dimension One circulation pump 01512-321, which is discontinued and superseded by HydroQuip 10-0121-A-K, this pump. It also crosses to Laing 6080U0012 and E10-NSHNNNN2W-01. Compare these numbers with the label on your old pump, or send us a photo and we’ll confirm.

Before You Install

  • Turn off the spa’s breaker first.
  • Confirm the old pump’s label says 230V.
  • Check that the connector on the 19″ cord matches the one on your old pump at the control box.
  • Close the valves or drain the spa before you loosen the hose clamps.
  • Push the hoses fully onto the barbs, tighten the clamps, then refill and leak-test before you close the cabinet.
  • Have a qualified spa technician do the hookup if you’re unsure.
✅ Not Sure It Fits? Verify Before Ordering

Hot tub part compatibility can vary by spa brand, model, year, serial number, control system, and part revision.

To help us identify the correct replacement part, please send clear photos of:

  • Your existing part label or sticker
  • Your spa serial number sticker
  • The equipment area or installation location (if accessible)

EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.


Frequently Asked Questions

Yes. 01512-321 is discontinued, and HydroQuip 10-0121-A-K (this pump) is its listed replacement: Laing E10, 230V, 3/4″ barb, 19″ cord, no flow switch.

No. The flow-switch version is Dimension One 01512-320E (HydroQuip 10-0121FS-K). Send us a photo of your pump and we’ll point you to the right one.

No. That’s the larger 1-amp, 230V circulation pump. Use our Dimension One long-thread circulation pump for that setup.

On the motor body of the pump. Photograph it along with the fittings and the cord’s connector, and send it through the form on this page; we’ll confirm the match.

01512-321 01512321 Dimension One 01512-321 circ pump 10-0121-A-K 6080U0012 E10-NSHNNNN2W-01 Laing E10 230V 240V 3/4 barb 19 inch cord Dimension One D1 circulation pump circ pump

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top