MinnSpas | EZHotTubParts.com

Dimension One Circulation Pumps

Dimension One Circulation Pumps

When your Dimension One stops heating or shows a flow error, the circulation pump is one of the first things to check. Match a replacement by the label on your old pump: 230V, about 1 amp, with 1-1/2″ threaded connections.

Shop: Dimension One Long-Thread Circulation Pump | 1-1/2″ Flat Gaskets

More Dimension One: Filters | All Dimension One Parts

Showing all 2 resultsSorted by price: high to low

Before You Order

Dimension One has used more than one circulation pump over the years. The pump we carry is an LX WTC50M with a long-thread wet end, 230V and about 1 amp, with 1-1/2″ threaded suction and side discharge. If your old pump’s label or fittings don’t match, send us a photo first.

The pump ships with the discharge up; the wiring and wet-end rotation guide (PDF) shows how to turn it and how to wire your existing cord.

✅ Not Sure It Fits? Verify Before Ordering

Dimension One circulation pumps are matched by voltage, amps and fitting type. Send clear photos of:

  • The label on your circulation pump
  • The front of the pump, showing the fittings
  • Your Dimension One serial number sticker

EZ Hot Tub Parts confirms fitment before you order, so you do not pay return freight on a wrong part.

Dimension One Circulation Pump Frequently Asked Questions

Read the label on the motor for voltage and amps, and look at the fittings on the front and side. Send us a photo if you’re not sure; we’ll confirm before you order.

Low flow is a common cause: a failing circulation pump, a clogged filter or a closed valve can all stop the heater. Check the filter and valves, then whether the circ pump is running.

No. Move the cord from your old pump to the new one; the wiring guide shows where each wire goes.

Shopping Cart
Scroll to Top