Single replacement Master Spas filter (50 sq ft teleweir inside thread) — ProAqua High Flow
Fits select Master Spas models that use the 50 sq ft teleweir inside thread cartridge. Master Spas used more than one filter size over the years, so match the diameter, length, and top and bottom style below to the filter you are replacing — or send us a photo and we will confirm before you order.
This same cartridge is also used in select Cal Spas, Dynasty Spas, Fourwinds Spas, Sunrise Spas hot tubs.
ProAqua high-flow filters were formerly sold under the Proline name — same filter, same high-flow core, new name.
Not sure which filter brand is right for you? Compare hot tub filter brands here.
Did you know the number one reason for hot tub freeze damage is a dirty filter? Dirty filters also cause additional stress on the pump/motor and leads to premature failure.
Proper Filter Care System:
- Have 2 sets of filters
- Install clean filter
- Rinse dirty filter with high pressure nozzle
- Verify no debris left between pleats, before storing on shelf to dry
- Once a month soak filters in a filter cleaner solution
Filter Specs (EZ05):
- Diameter – 4-15/16″
- Length – 13-1/2″
- Top: Handle
- Bottom: Female SAE Thread
- SQFT: 50
What’s in the box: one filter cartridge.
✅ Not Sure It Fits? Verify Before Ordering
Hot tub part compatibility can vary by spa brand, model, year, serial number, control system, and part revision.
To help us identify the correct replacement part, please send clear photos of:
- Your existing part label or sticker
- Your spa serial number sticker
- The equipment area or installation location (if accessible)
EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.
Helpful photos: serial number sticker, equipment labels, full equipment view, and any damaged or leaking parts.
It fits the Master Spas models that use a 50 sq ft teleweir inside thread cartridge measuring 4-15/16″ in diameter and 13-1/2″ long. Measure your old filter end to end and across the end cap — if the numbers match, it fits. Still unsure? Use the fitment form above and send a photo of your filter.
Measure the diameter across the end cap and the total length from end to end, then check the top (open, closed, handle) and the bottom (open, threaded, slip fit). This cartridge is 4-15/16″ x 13-1/2″, top: handle, bottom: female sae thread.
This cartridge cross-references to: Unicel 4CH-949, 17-175-2253, Filbur FC-0172, Pleatco PWW50L, 817-4050, ProLine P4CH-949.
Yes. ProAqua is the new name for the Proline high-flow line — same filter, same high-flow core.
Rinse it every 2–4 weeks, deep-clean it monthly with filter cleaner, and replace it every 12–24 months or sooner if the pleats are torn, flattened, or the end caps are cracked. Keeping two sets and rotating them makes each set last longer.
A second set means you always have a clean, dry filter ready to drop in while the other set soaks. Multi-packs also cost less per filter than buying singles.
PA-4949 Unicel 4CH-949 17-175-2253 Filbur FC-0172 Pleatco PWW50L 817-4050 ProLine P4CH-949
Reviews
There are no reviews yet.