MinnSpas | EZHotTubParts.com

Bullfrog Spas Filter – 50 Sq Ft Outside Thread – EZ12 – 4 Pack – Darlly

$253.99

Choose Your Filter OptionBudget Darlly Ego3 Reusable
Not sure which to pick? Compare filter brands
Bundle and SaveSingle Filter 2 Pack Save $12 4 Pack

4 Pack of replacement 50 sq ft outside thread filters for select Bullfrog Spas hot tubs — Darlly

Buying in a pack saves you money over singles — and a spare set lets you rotate clean filters.

- +
⭐⭐⭐⭐⭐ 4.9/5 Google Rating
Guaranteed Safe Checkout

4 Pack of replacement Bullfrog Spas filters (50 sq ft outside thread) — Darlly

Fits select Bullfrog Spas models that use the 50 sq ft outside thread cartridge. Bullfrog Spas used more than one filter size over the years, so match the diameter, length, and top and bottom style below to the filter you are replacing — or send us a photo and we will confirm before you order.

Not sure which filter brand is right for you? Compare hot tub filter brands here.

Did you know the number one reason for hot tub freeze damage is a dirty filter? Dirty filters also cause additional stress on the pump/motor and leads to premature failure.

Proper Filter Care System:

  • Have 2 sets of filters
  • Install clean filter
  • Rinse dirty filter with high pressure nozzle
  • Verify no debris left between pleats, before storing on shelf to dry
  • Once a month soak filters in a filter cleaner solution

 

Filter Specs (EZ12):

  • Diameter – 8″
  • Length – 6″
  • Top: Handle
  • Bottom: Male SAE Thread
  • SQFT: 50

What’s in the box: four filter cartridges.

✅ Not Sure It Fits? Verify Before Ordering

Hot tub part compatibility can vary by spa brand, model, year, serial number, control system, and part revision.

To help us identify the correct replacement part, please send clear photos of:

  • Your existing part label or sticker
  • Your spa serial number sticker
  • The equipment area or installation location (if accessible)

EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.


It fits the Bullfrog Spas models that use a 50 sq ft outside thread cartridge measuring 8″ in diameter and 6″ long. Measure your old filter end to end and across the end cap — if the numbers match, it fits. Still unsure? Use the fitment form above and send a photo of your filter.

Measure the diameter across the end cap and the total length from end to end, then check the top (open, closed, handle) and the bottom (open, threaded, slip fit). This cartridge is 8″ x 6″, top: handle, bottom: male sae thread.

This cartridge cross-references to: Darlly 80503, 10-2870, Unicel 8CH-950, Pleatco PBF50-F2S, Filbur FC-0536, 17-175-3690, 4-05-0534, 80503, 15052, PBF50, 101035, NFC0536, Pleatco PBF35-M, Bullfrog 10-2785, ProLine P8CH-950, PA-8951.

This is a Darlly replacement cartridge. Compare it with the other filter brands we carry on our filter brand comparison page.

Rinse it every 2–4 weeks, deep-clean it monthly with filter cleaner, and replace it every 12–24 months or sooner if the pleats are torn, flattened, or the end caps are cracked. Keeping two sets and rotating them makes each set last longer.

A second set means you always have a clean, dry filter ready to drop in while the other set soaks. Multi-packs also cost less per filter than buying singles.

17-777-3690 PA-8950 Darlly 80503 10-2870 Unicel 8CH-950 Pleatco PBF50-F2S Filbur FC-0536 17-175-3690 4-05-0534 80503 15052 PBF50 101035 NFC0536 Pleatco PBF35-M Bullfrog 10-2785 ProLine P8CH-950 PA-8951

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Shopping Cart
Scroll to Top