American Select Spas Topside Control — TP600, 3 Pump
This is the branded replacement, not a generic substitute: the genuine American Select Spas printed overlay applied to a genuine Balboa TP600 LCD topside panel. Your spa looks the way it did the day it was delivered, with the same Pump 1 / Pump 2 / Pump 3 and Temp / Light buttons in the same places.
How to know this is your panel
Your panel is the long oval TP600 with an LCD window and the American Select Spas logo across the top. This is the three-pump version — three jet buttons down the left, Temp and Light down the right. If your panel shows only two pump buttons, or has a Stereo button, tell us and we’ll match the correct overlay before shipping.American Select Spas topside control TP600 3 pump 440-0199 33-1503-08 LPI Aqua Living balboa BP overlay Pump 1 Pump 2 Pump 3 Temp Light
Why a branded panel and not a generic one
A generic Balboa overlay will run the spa, but the buttons read “Jets” instead of “Pump” and there is no American Select logo — it always looks like a repair. This one doesn’t.
Your spa’s circuit board decides what each button does, not the topside. That is why the correct branded overlay on the correct TP600 panel gives you an OEM-appearance replacement that behaves exactly like the original.
What’s in the box
part 440-0199
4-pin Molex cord
The Balboa TP600 topside control with the American Select Spas 3-pump overlay applied — one complete, ready-to-install panel. Sold as a complete topside only; we do not sell these branded overlays separately.
Easy to install: with the spa powered off, unplug the old panel from the circuit board, plug the new one in, seat it on a clean dry surface, and restore power.
*Manufacturer reserves the right to make mid-production changes that do not materially affect how the part functions. Artwork, colour shade and finish may vary slightly from the image shown. If a part doesn’t work, we’ll make it right — if it works but the graphics differ slightly from the photo, that’s normal in this industry.
✅ Not Sure It Fits? Verify Before Ordering
Send clear photos of your current topside control (front, showing the buttons and logo), the cable connector behind it, and your spa pack label. We’ll confirm the right overlay and panel before you order.
It uses the genuine American Select Spas printed overlay on a genuine Balboa TP600 topside panel — the same two components your spa was built with. We assemble it here so it arrives as one finished panel.
Not this one. Some American Select spas use a layout with a Stereo button instead of a third pump. Send us a photo of your panel and we’ll match the correct overlay.
Yes. The circuit board in your spa controls which output each button operates — the topside simply reports the press. As long as the button count and layout match your original, the panel behaves the same.
Not on its own. We sell these branded panels as complete topside controls so you get a finished part rather than a sticker that may not sit right on a worn panel.
For most owners, yes. Shut the power off at the breaker, unplug the old topside from the circuit board, connect the new one, mount it, then restore power. No special tools required. If you are not comfortable working inside the equipment compartment, have a spa technician handle it.
Reviews
There are no reviews yet.