Waterway 5″ Super Hi-Flo Suction Cover Kit – Black, with 2 Screws
A genuine Waterway Plastics 5″ Super Hi-Flo suction cover in black, packed with the two stainless steel mounting screws it needs. Waterway sells the cover without screws, and the old screws are often corroded or stripped by the time the cover cracks, so we put both in one kit.
When to Replace It
- The cover is cracked, broken or has a missing piece
- The cover is loose or a screw is missing
- The plastic is faded, chalky or brittle from sun and sanitizer
Safety first: a cracked, loose or missing suction cover is an entrapment hazard. Turn the spa off and keep everyone out of the water until the new cover is installed.
Compatibility
This cover fits the Waterway 5″ Super Hi-Flo suction fitting. The cover measures about 5″ across (5-3/16″ at the widest point) and is round. Molded into the cover: “Wall only: 180 GPM submerged”, VGB 2008 and SPC-3V. Only use it on a wall suction, and only where the pump flow is within that rating. Waterway also makes 3-1/2″ Hi-Flo and other suction covers that look similar, so measure your old cover across the face before you order. Not sure? Send a photo through the form below.
What’s in the Box
- 1 Waterway 5″ Super Hi-Flo suction cover, black
- 2 Waterway #6-20 x 5/8″ flat-head Phillips screws, stainless steel
The wall fitting behind the cover is not included.
Installation Tips
- Turn the spa off at the breaker before you reach into the suction.
- Remove the old screws and cover. Clear any debris from the fitting.
- Line up the new cover and snug the screws by hand with a Phillips screwdriver. Don’t overtighten; the threads are in plastic.
- Check that the cover sits flat and tight before you turn the spa back on.
Replacement Information
Cover: Waterway part number 642-3631V (also listed as 642-3631, 642-3631B, 6406-551 and 953856). Horizon 55-270-2884. Screws: Waterway 819-1251 (also 819-1250, 6406-553), Horizon 51-270-1021.
Ships direct from our distributor’s warehouse, usually the next business day. Orders over $99 ship free in the lower 48.
Related: All Waterway Parts
✅ Not Sure It Fits? Verify Before Ordering
Hot tub part compatibility can vary by spa brand, model, year, serial number, control system, and part revision.
To help us identify the correct replacement part, please send clear photos of:
- Your existing part label or sticker
- Your spa serial number sticker
- The equipment area or installation location (if accessible)
EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.
642-3631V 642-3631 V 642-3631 642-3631B 6423631V 6406-551 953856 806105366399 55-270-2884 HZ-55-270-2884 819-1251 819-1250 6406-553 369832 51-270-1021 waterway super hi-flo suction cover 5 inch black hot tub suction cover screws SPC-3 VP









Reviews
There are no reviews yet.