MinnSpas | EZHotTubParts.com

Sundance Spas Circulation Pump – 115V, 3/4″ Barb, 48″ Cord – Laing E10 Replacement

$335.99

Fits: Sundance spas with the 115V Laing E10 circ pump on 3/4″ barbed (hose-and-clamp) fittings.

Common symptoms: Water won’t come up to temperature, a flow or heater error, or a circ pump that is silent, humming or noisy.

Compatibility: Check that your old pump says 115V and has barbed ports, not threaded. The 230V version is a different pump.

Key specs: 115V · 50/60 Hz · 1 speed · 3/4" barb · metal base · 48" cord

Not sure? Send us a photo of your pump label and we’ll confirm it fits.

- +
⭐⭐⭐⭐⭐ 4.9/5 Google Rating
Guaranteed Safe Checkout

🚚 How fast will this ship? 95% of Balboa, Gecko & Waterway parts ship within 2 business days.

Need it overnighted? Read this first

Sundance Spas Circulation Pump – 115V, 3/4″ Barb, 48″ Cord – Laing E10 Replacement

Shop: Sundance Circulation Pumps | Sundance Heaters | Sundance Spa Parts

Sundance spas with a dedicated circulation system rely on a small, quiet Laing E10 pump to keep water moving through the filter and the low-flow heater day and night. If that pump stops, the heater can’t run and the spa cools off. This listing is the Laing E10 version Sundance specifies: 115V, 3/4″ barbed ports, metal base and a 48″ cord.

Compatibility & Installation

Sundance has used several versions of the E10 over the years: 115V and 230V, barbed and threaded. This one is the 115V, 3/4″ barbed version. Read the label on your old pump and look at how the plumbing attaches: barbed fittings are ridged nipples with hose pushed over them and held by clamps, threaded fittings screw into the pump body.

Specifications

  • Pump: Laing E10 circulation pump
  • Voltage: 115V, 50/60 Hz
  • Speeds: 1 speed, continuous duty
  • Intake / discharge: 3/4″ barb
  • Base: metal
  • Cord: 48″ cord, attached

What’s in the Box

One Laing E10 circulation pump with a 48″ cord. Hose and clamps are not included; move yours over from the old pump, or replace them if they’re cracked or rusted.

Common Symptoms of a Failing Circulation Pump

  • Water temperature drops or never reaches the set point
  • Flow, pressure or heater errors on the topside
  • Pump is silent or only hums
  • Whining or rattling from the equipment bay
  • A slow drip at the pump body

Replacement Information

Replaces Sundance / Jacuzzi circulation pump 6500-460 (also listed as SD6500-460) and 6500-038. Crosses to HydroQuip 10-0120M-K and the Laing numbers E10-NSHN1W-19 and E10-NSHNDNN1W-01. If your Sundance has the 230V, 3/4″ barbed circ pump (6000-125 / 6500-035), or the larger 1-1/2″ pump, it needs a different part; see Sundance Circulation Pumps above.

Before You Install

  • Shut the spa off at the breaker.
  • Verify your old pump is 115V before you swap it.
  • Check that the cord connection matches the one on your old pump at the control box.
  • Close the slice valves or drain the spa before you loosen the hose clamps.
  • Mount the new pump’s base the same way as the old one so the hoses line up.
  • Push the hoses fully onto the barbs, tighten the clamps, then fill and leak-test before closing up.
  • Call a qualified spa technician if you’re not comfortable with the electrical side.
✅ Not Sure It Fits? Verify Before Ordering

Hot tub part compatibility can vary by spa brand, model, year, serial number, control system, and part revision.

To help us identify the correct replacement part, please send clear photos of:

  • Your existing part label or sticker
  • Your spa serial number sticker
  • The equipment area or installation location (if accessible)

EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.


Frequently Asked Questions

Yes. Sundance 6500-460 (SD6500-460) is the 115V Laing E10 with 3/4″ barbs, a metal base and a 48″ cord. This listing is that pump, HydroQuip 10-0120M-K, which also replaces 6500-038.

No. Order the 230V 3/4″ barb version (6000-125) instead. Running a 115V pump on 230V will burn it out. Send us a photo of the label if you’re unsure which you have.

Barbed ports are ridged nipples with hose pushed over them and held by clamps. Threaded ports have fittings screwed into the pump. This pump is barbed.

The heater only turns on when it senses water flowing. With no circulation, the control blocks the heater to protect it, so the spa slowly cools.

6500-460 6500460 SD6500-460 SD6500460 Sundance 6500-460 circ pump 6500-038 2478962 71581 10-0120M-K 6080U0007 E10-NSHN1W-19 E10-NSHNDNN1W-01 Laing E10 115V 120V 3/4 barb metal Sundance circulation pump

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top