MinnSpas | EZHotTubParts.com

Grundfos Series 43 Circulation Pump – 230V, 1″ Barb, 0.74 Amp

$180.99

Fits: hot tubs that use a 230V Grundfos Series 43 circulation pump with 1″ barbed ports.
Common symptoms: FLO or no-flow errors, no heat, a circ pump that hums, grinds or won’t run.
Compatibility: match the Grundfos label on your old pump, the voltage (230V) and the 1″ barb connections.
Key Specs: 230V · 0.74 A · 60 Hz · 1 speed · 1″ barb · 12–18 GPM
Not sure? Send us a photo of the label and we’ll confirm it fits.

- +
⭐⭐⭐⭐⭐ 4.9/5 Google Rating
Guaranteed Safe Checkout

🚚 How fast will this ship? 95% of Balboa, Gecko & Waterway parts ship within 2 business days.

Need it overnighted? Read this first

Grundfos Series 43 Circulation Pump – 230V, 1″ Barb, 0.74 Amp

A genuine Grundfos Series 43 circulation pump, the small, quiet pump that runs your spa’s filtration and heating cycles. This is the 230V version with 1″ barbed ports, drawing just 0.74 amps. If your spa’s pump is 115V, use the 115V version of this pump instead.

Specifications

  • Brand / Model: Grundfos Series 43
  • Voltage: 230V, 60 Hz
  • Amperage: 0.74 A
  • Speeds: 1
  • Flow: 12–18 GPM
  • Plumbing: 1″ barb

Compatibility & Installation

Match three things before ordering: the Grundfos Series 43 name on your old pump’s label, the voltage (230V), and the 1″ barbed inlet and outlet. Pumps that look alike can be different voltages, so go by the label, not the photo.

Before you start: turn off power at the breaker. Confirm the voltage on the old pump. Have new hose clamps ready for the barbs, check the flow direction matches the old pump, and check for leaks and air locks before you close up the cabinet. If the wiring is beyond your comfort level, use a qualified spa technician.

Common Symptoms of a Failing Circulation Pump

  • FLO, FL1 or other flow errors on the topside
  • Spa won’t heat even though the heater is good
  • Pump hums but doesn’t run, or runs loud and grinds
  • Water leaking at the pump body

What’s in the Box

One Grundfos Series 43 circulation pump, 230V, with 1″ barbed ports. A power cord and hose clamps are not listed as included; most installs reuse the cord from the old pump. Ask us if you need a cord.

Replacement Information

Supplier part number 10-0135-K. Grundfos number 59896292. The 115V version is 10-0134-K (Grundfos 59896291).

*Manufacturer reserves the right to make production changes. Actual product received may vary slightly in appearance but the function remains the same.

✅ Not Sure It Fits? Verify Before Ordering

Hot tub part compatibility can vary by spa brand, model, year, serial number, control system, and part revision.

To help us identify the correct replacement part, please send clear photos of:

  • Your existing part label or sticker
  • Your spa serial number sticker
  • The equipment area or installation location (if accessible)

EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.


It fits if your old pump is a Grundfos Series 43, 230V, with 1″ barbed ports. The Grundfos number on this model is 59896292 (supplier number 10-0135-K). Send a photo of your label through the fit-check form and we’ll confirm.

Then you need the 115V version, Grundfos 59896291. Never install a 230V pump on a 115V circuit or the other way around.

The supplier rates it at 12–18 GPM at 0.74 amps. Some spa packs and low-flow heaters need a minimum flow, so check your control’s requirement if you are replacing a different brand of pump.

A cord is not listed as included. Most owners reuse the cord from their old pump. If yours is damaged, contact us and we’ll find the right one.

Many owners do. Turn off the breaker, drain or isolate the plumbing, move the wiring to the new pump, fit the 1″ barbs with new clamps, then refill and bleed any air before running the spa. Use a technician if you’re not comfortable with the wiring.

In-stock pumps ship from our supplier, usually within 1–2 business days. Orders over $99 ship free in the lower 48.

10-0135-K HQ-10-0135-K 59896292 Grundfos Series 43 230V 0.74A 1″ barb circulation pump grundfos circ pump 230 volt 240v

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top