Grundfos Series 43 Circulation Pump – 115V, 1″ Barb
A genuine Grundfos Series 43 circulation pump, the small, quiet pump that runs your spa’s filtration and heating cycles. This is the 115V version with 1″ barbed ports. If your spa runs on 230V, use the 230V version of this pump instead.
Specifications
- Brand / Model: Grundfos Series 43
- Voltage: 115V, 60 Hz
- Speeds: 1
- Plumbing: 1″ barb
- Amperage and flow: check the label on your old pump; the supplier does not list them for the 115V model
Compatibility & Installation
Match three things before ordering: the Grundfos Series 43 name on your old pump’s label, the voltage (115V), and the 1″ barbed inlet and outlet. Pumps that look alike can be different voltages, so go by the label, not the photo.
Before you start: turn off power at the breaker. Confirm the voltage on the old pump. Have new hose clamps ready for the barbs, check the flow direction matches the old pump, and check for leaks and air locks before you close up the cabinet. If the wiring is beyond your comfort level, use a qualified spa technician.
Common Symptoms of a Failing Circulation Pump
- FLO, FL1 or other flow errors on the topside
- Spa won’t heat even though the heater is good
- Pump hums but doesn’t run, or runs loud and grinds
- Water leaking at the pump body
What’s in the Box
One Grundfos Series 43 circulation pump, 115V, with 1″ barbed ports. A power cord and hose clamps are not listed as included; most installs reuse the cord from the old pump. Ask us if you need a cord.
Replacement Information
Supplier part number 10-0134-K. Grundfos number 59896291. The 230V version is 10-0135-K (Grundfos 59896292).
*Manufacturer reserves the right to make production changes. Actual product received may vary slightly in appearance but the function remains the same.
✅ Not Sure It Fits? Verify Before Ordering
Hot tub part compatibility can vary by spa brand, model, year, serial number, control system, and part revision.
To help us identify the correct replacement part, please send clear photos of:
- Your existing part label or sticker
- Your spa serial number sticker
- The equipment area or installation location (if accessible)
EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.
It fits if your old pump is a Grundfos Series 43, 115V, with 1″ barbed ports. The Grundfos number on this model is 59896291 (supplier number 10-0134-K). Send a photo of your label through the fit-check form and we’ll confirm.
Read the voltage on your old pump’s label. The 115V pump is Grundfos 59896291; the 230V pump is Grundfos 59896292. Installing the wrong voltage will damage the pump.
A cord is not listed as included. Most owners reuse the cord from their old pump. If yours is damaged, contact us and we’ll find the right one.
Flow errors, no heat with a good heater, a pump that hums but won’t spin, grinding noise, or leaks at the pump body are the usual signs. If the pump has power and still won’t run, it’s usually time to replace it.
Many owners do. Turn off the breaker, drain or isolate the plumbing, move the wiring to the new pump, fit the 1″ barbs with new clamps, then refill and bleed any air before running the spa. Use a technician if you’re not comfortable with the wiring.
In-stock pumps ship from our supplier, usually within 1–2 business days. Orders over $99 ship free in the lower 48.
10-0134-K HQ-10-0134-K 59896291 Grundfos Series 43 115V 1″ barb circulation pump grundfos circ pump 115 volt





Reviews
There are no reviews yet.