MinnSpas | EZHotTubParts.com

Cal Spas Circulation Pump Kit, Right Plumbing, 1-Speed, 48 Frame, 230V 60 Hz – OEM Replacement

$224.99

Fits: Cal Spas hot tubs that use a 1-speed, 48 frame, 230 volt circulation pump with right-side plumbing. Cal Spas part PUM22000535-SK.

Genuine Cal Spas pump, shipped from Cal Spas’ parts distributor. Match the label on your old pump before ordering.

Not sure? Send us a photo of the pump label and we’ll confirm it fits.

- +
⭐⭐⭐⭐⭐ 4.9/5 Google Rating
Guaranteed Safe Checkout

Cal Spas Circulation Pump Kit, Right Plumbing, 1-Speed, 48 Frame, 230V 60 Hz – OEM Replacement

This is the genuine Cal Spas circulation pump sold under Cal Spas part number PUM22000535-SK. The circulation pump is the small pump that runs most of the day to move water through the filter and heater, separate from the jet pumps. It ships from Cal Spas’ own parts distributor, so it’s the same part the factory installs.

This is the kit version, set up by Cal Spas for right-side plumbing. Match the plumbing side of your old pump. If you aren’t sure which side you have, send us a photo of the pump in place before you order.

Specifications

  • Type: circulation pump, 1-speed
  • Motor frame: 48 frame
  • Power: 230 volts, 60 Hz
  • Plumbing: right-side kit
  • Cal Spas part number: PUM22000535-SK

How to Match Your Old Pump

  • Read the label on the old motor: frame size (48), voltage (230V), speed (1-speed) and hertz must match.
  • Compare the Cal Spas number on the pump or in your paperwork to the number on this page.
  • Check which side the plumbing connects on, and the pipe size at the unions.
  • Find your spa’s parts list in the Cal Spas owner’s manual library.

Installation Notes

  • Turn off power at the breaker and confirm it’s off before you open the equipment area.
  • Close the slice valves on both sides of the pump, or drain the spa below the pump, before you loosen the unions.
  • Use new union gaskets or O-rings and hand-tighten the unions.
  • Wiring a 230 volt pump is a job for someone comfortable with spa electrical. When in doubt, have a technician install it.

Related: Cal Spas Circulation Pumps | Cal Spas Jet Pumps | All Cal Spas Parts | Cal Spas Owner’s Manuals

Ships from Cal Spas’ parts distributor. Orders over $99 ship free in the lower 48.

✅ Not Sure It Fits? Verify Before Ordering

Cal Spas circulation pumps vary by frame size, voltage, plumbing side and pump revision, even within one model year.

To help us identify the correct replacement, please send clear photos of:

  • The label on your old pump motor
  • Your spa serial number sticker
  • The pump in place, showing which side the plumbing connects

EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.


It fits Cal Spas hot tubs that use a 1-speed, 48 frame, 230 volt circulation pump plumbed on the right side. The surest check is the label on your old pump and the Cal Spas number PUM22000535-SK. Send us a photo and we’ll confirm it.

Yes. It’s the Cal Spas factory part, shipped from Cal Spas’ parts distributor.

Common signs are a humming motor that won’t start, a loud bearing noise, a leak from the pump seal, or a flow or heater error because water isn’t moving. Check for a dirty filter and closed valves first.

They’re set up for the side your spa’s plumbing connects to the pump. Match the side on your old pump; send us a photo if you’re not sure.

PUM22000535-SK PUM22000535 22000535-SK cal spa circulation pump cal spas circ pump 48 frame 230v

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top