MinnSpas | EZHotTubParts.com

LX Circulation Pumps

LX Circulation Pumps

The small LX pumps that keep your hot tub filtering and heating around the clock: the WTC50M and the compact WE10 and WE14. On the WTC50M, check the thread length: the short-thread standard version fits most spas, but Jacuzzi, Sundance and Dimension One need the long-thread version.

Shop: WTC50M Short Thread | WE14 230V | WE10 120V

Long-Thread WTC50M by Brand: Sundance | Jacuzzi | Dimension One

More LX: LX Jet Pumps | All LX Parts

Showing all 4 resultsSorted by price: high to low

Which LX Circulation Pump Do I Have?

  • WTC50M — 230V, about 1 amp, 1-1/2″ threaded suction and side discharge, 48 frame. Comes in a short-thread standard version and a long-thread version for Jacuzzi / Sundance unions.
  • WE14 — 230V high-flow circulation pump, about 9-1/2″ long. A common fix where a longer pump won’t fit.
  • WE10 — 120V circulation pump with 3/4″ barb fittings.

Short Thread or Long Thread?

Both WTC50M versions share the same motor. The difference is the wet end: the long-thread version has longer threads so it can reach the deeper unions on Jacuzzi and Sundance spas. If you are replacing a Jacuzzi, Sundance or Dimension One pump, choose the long-thread pump for your brand. For other spas, the standard short-thread pump is the usual match. The WTC50M wiring and wet-end rotation guide (PDF) covers both.

While the cabinet is open: replace the union gaskets (1-1/2″ flat gasket 2-pack), and check your filter, because a dirty filter makes a circulation pump work harder.

✅ Not Sure It Fits? Verify Before Ordering

LX circulation pumps are matched by model, voltage, amps and fitting type. Send clear photos of:

  • The label on the motor (model, volts, amps)
  • The front of the pump, showing the suction and discharge fittings
  • Your spa’s make and serial number sticker

EZ Hot Tub Parts confirms fitment before you order, so you do not pay return freight on a wrong part.

LX Circulation Pump Frequently Asked Questions

The LX WTC50M is a 230V, 1-amp circulation pump with 1-1/2″ threaded connections. It runs continuously to filter and heat the spa. It is sold as WTC50MSTD (short thread) and WTC50M-USA or WTC50MLS (long thread).

No. Its threads are too short for Sundance / Jacuzzi unions, and it will not replace 6500-907. Use the long-thread pump listed for your brand.

It can be. Most spa controls won’t fire the heater without enough flow, so a weak or failing circulation pump often shows up as no heat or a flow error. A dirty filter or a closed valve can cause the same symptoms, so check those first.

The WTC50M ships with unions but no cord. Move the cord from your old pump; the wiring guide shows the 230V hookup.

The WE14 is about 9-1/2″ long, shorter than the WTC50M, and is our usual pick where space is tight. Measure your old pump and send us a photo if you’re unsure.

Shopping Cart
Scroll to Top