MinnSpas | EZHotTubParts.com

Jacuzzi Circulation Pump – 115V, 3/4″ Barb, 48″ Cord – Laing E10 Replacement

$335.99

Fits: Jacuzzi hot tubs that use the small 115V Laing E10 circulation pump with 3/4″ barbed ports.

Common symptoms: Spa not heating, flow errors on the topside, a circ pump that hums, runs hot or has stopped, or a drip under the pump.

Compatibility: Jacuzzi shares this pump with Sundance. Match the 115V rating and the 3/4″ barbed (hose-and-clamp) connections on your old pump.

Key specs: 115V · 50/60 Hz · 1 speed · 3/4" barb · metal base · 48" cord

Not sure? Send us a photo of your pump label and we’ll confirm it fits.

- +
⭐⭐⭐⭐⭐ 4.9/5 Google Rating
Guaranteed Safe Checkout

🚚 How fast will this ship? 95% of Balboa, Gecko & Waterway parts ship within 2 business days.

Need it overnighted? Read this first

Jacuzzi Circulation Pump – 115V, 3/4″ Barb, 48″ Cord – Laing E10 Replacement

Shop: Jacuzzi Circulation Pumps | Jacuzzi Heaters | Jacuzzi Parts

On Jacuzzi hot tubs that run a 115V circulation system, a small Laing E10 pump pushes water through the filter and heater around the clock. When it fails, the heater loses flow and the tub stops heating. This is the Laing E10 with 3/4″ barbed intake and discharge, a metal base and a 48″ cord, the same pump Jacuzzi shares with its sister brand Sundance.

Compatibility & Installation

Match three things on your old pump before you order: 115V on the label, 3/4″ barbed intake and discharge (hose pushed over ridged nipples and held with clamps), and a cord that reaches your control box. Jacuzzi also used a 230V version of this pump, and some E10 pumps have threaded ports instead of barbs; those are different parts, so check the label first.

Specifications

  • Pump: Laing E10 circulation pump
  • Voltage: 115V, 50/60 Hz
  • Speeds: 1 speed, continuous duty (24-hour circulation)
  • Intake / discharge: 3/4″ barb
  • Base: metal
  • Cord: 48″ cord, attached

What’s in the Box

One Laing E10 circulation pump with its 48″ cord. Hose and hose clamps are not included; reuse yours if they’re in good shape. If the hose is cracked or the clamps are rusted, replace them while the pump is out.

Common Symptoms of a Failing Circulation Pump

  • Spa won’t heat, or heats slowly
  • Flow or pressure errors on the topside
  • Pump hums but doesn’t spin
  • Loud whine or grinding from the equipment bay
  • Water leaking at the pump

Replacement Information

This pump replaces Jacuzzi / Sundance circulation pump 6500-460 (Laing E10, 115V, 3/4″ barb, 48″ cord) and also 6500-038. It crosses to HydroQuip 10-0120M-K and the Laing numbers E10-NSHN1W-19 and E10-NSHNDNN1W-01. If your Jacuzzi circ pump reads 230V, you need the 230V 3/4″ barb version (6000-125) instead. Some Jacuzzi models use a larger 1-1/2″ circulation pump; if yours has big threaded unions, look at our Jacuzzi long-thread circulation pump.

Before You Install

  • Turn the spa off at the breaker before you open the equipment bay.
  • Confirm your old pump reads 115V. A 115V pump on a 230V circuit will fail.
  • Check that the cord connection matches the one on your old pump at the control box.
  • Close the slice valves (or drain the spa) before you loosen the hose clamps.
  • Note how the old pump’s base is mounted so the new one sits the same way and the hoses line up.
  • Push the hoses fully onto the barbs, tighten the clamps, then fill the spa and check for leaks before closing the cabinet.
  • If the wiring is beyond your comfort level, have a qualified spa technician do the hookup.
✅ Not Sure It Fits? Verify Before Ordering

Hot tub part compatibility can vary by spa brand, model, year, serial number, control system, and part revision.

To help us identify the correct replacement part, please send clear photos of:

  • Your existing part label or sticker
  • Your spa serial number sticker
  • The equipment area or installation location (if accessible)

EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.


Frequently Asked Questions

Yes. 6500-460 is the Jacuzzi / Sundance number for the 115V Laing E10 circulation pump with 3/4″ barbs and a 48″ cord, and this is that pump (HydroQuip 10-0120M-K). It also replaces 6500-038.

Look at the label on your current circulation pump. It should say Laing E10 (or show one of the numbers on this page) and 115V, with hose clamped onto 3/4″ barbs. If it reads 230V or the fittings screw into the pump, it’s a different version; send us a photo and we’ll match it.

No. Order the 230V 3/4″ barb version (Jacuzzi / Sundance 6000-125). Running a 115V pump on 230V will burn it out.

Most owners can. Shut off the breaker, close the valves, loosen the clamps and slide the hoses off the old pump, then push them onto the new pump’s barbs and re-clamp. Connect the cord the same way the old one was, fill and leak-test before you close the cabinet.

It ships from the distributor, usually within 1–2 business days. Orders over $99 ship free in the lower 48.

6500-460 6500460 SD6500-460 Jacuzzi 6500-460 circ pump 6500-038 2478962 71581 10-0120M-K 6080U0007 E10-NSHN1W-19 E10-NSHNDNN1W-01 Laing E10 115V 120V 3/4 barb metal Jacuzzi circulation pump

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top