MinnSpas | EZHotTubParts.com

Waterway Filter Lock Ring – In-Line, Top Mount & HydroStorm Filter Housings

$22.99

Fits: Waterway In-Line, Top Mount (top load) and HydroStorm spa filter housings.
The threaded ring that holds the lid on your filter housing; replace it when it’s cracked, stripped or won’t stay tight.
Not sure? Send us a photo of your filter housing and we’ll confirm it fits.

- +
⭐⭐⭐⭐⭐ 4.9/5 Google Rating
Guaranteed Safe Checkout

🚚 How fast will this ship? 95% of Balboa, Gecko & Waterway parts ship within 2 business days.

Waterway Filter Lock Ring – In-Line, Top Mount & HydroStorm Filter Housings

A genuine Waterway Plastics lock ring for Waterway In-Line, Top Mount (top load) and HydroStorm filter housings. It’s the large threaded ring that clamps the lid onto the housing and keeps the filter sealed under pump pressure.

When to Replace It

  • The ring is cracked or split, often after a hard freeze or overtightening
  • The threads are stripped and the ring won’t tighten
  • The lid leaks or lifts when the pump starts, even with a good O-ring
  • The ring is brittle or chalky from sun and chemical exposure

Compatibility

This ring fits Waterway In-Line, Top Mount and HydroStorm filter housings. Waterway and other manufacturers make several filter housings that look alike, so check that your housing says Waterway and compare the ring with your old one before ordering. Not sure? Send a photo of the housing and the old ring through the form below.

What’s in the Box

One lock ring. The lid, the housing and the lid O-ring are not included. If your O-ring is flat, cracked or dry, replace it at the same time and coat it with a silicone lubricant so it seals.

Installation Tips

  • Turn the spa pumps off at the breaker or put the spa in standby before opening the filter.
  • Close the slice valves or drain the water below the filter if your housing sits below the waterline.
  • Clean the threads, seat the O-ring, then tighten the ring by hand. No tools needed; overtightening cracks the ring.
  • Restart the pumps and check for leaks and trapped air.

Replacement Information

Waterway part number 500-1000. Horizon 17-270-1030. Also listed as 322456, 4740-01, 9348-325, WC61209 and WWP-851-8011.

✅ Not Sure It Fits? Verify Before Ordering

Hot tub part compatibility can vary by spa brand, model, year, serial number, control system, and part revision.

To help us identify the correct replacement part, please send clear photos of:

  • Your existing part label or sticker
  • Your spa serial number sticker
  • The equipment area or installation location (if accessible)

EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.


Waterway In-Line, Top Mount (top load) and HydroStorm filter housings. It’s Waterway part 500-1000, also listed as 4740-01, 9348-325 and WC61209. Send a photo of your housing if you’re not sure.

No, it’s the lock ring only. Check your lid O-ring while the filter is open; if it’s flat or cracked, replace it so the new ring can seal.

The usual causes are overtightening, freezing water in the housing, or plastic that has aged from sun and sanitizer. Hand-tight is enough; the O-ring does the sealing.

Check the O-ring, the O-ring groove and the lid for cracks or debris. A dry or twisted O-ring is the most common cause of a leak at the lid.

500-1000 17-270-1030 HZ-17-270-1030 322456 4740-01 806105087638 9348-325 WC61209 WWP-851-8011 waterway lock ring filter lid ring top load filter in-line filter hydrostorm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top