Gecko in.k300 Topside Control – 4 Button, Pump 1 / Light / Up / Down, with Overlay, 10 ft Cord
The genuine Gecko in.k300 is a compact 4-key spaside control with a big, bright LCD screen that’s easy to read in full sun and simple to use at night. This is the complete kit: the in.k300 keypad with the Pump 1 · Light · Up · Down overlay already on it and a 10 ft cord ending in Gecko’s in.link plug. It plugs straight into Gecko X and Y series spa packs.
How to know this is your panel
Look for a rectangular Gecko keypad with an LCD in the middle and four buttons: Pump 1, Light, and Up / Down arrows for temperature. The panel face measures 6-5/16″ × 2-1/4″. If your keypad has two pump buttons (Pump 1, Pump 2, Light, Temp), you need the 2-pump in.k300 kit instead. Not sure? Send us a photo and we’ll confirm before it ships.
Common symptoms
- Screen is blank, dim, or shows missing segments
- One or more buttons don’t respond, or respond only when pressed hard
- Cracked face, water under the overlay, or corrosion on the cord or plug
- Overlay is faded or peeling but the keypad still works (you only need the overlay by itself)
Specifications
- Model: Gecko in.k300, 1-output (one pump)
- Buttons: 4 (Pump 1, Light, Up, Down)
- Display: LCD
- Shape: Rectangular
- Panel size: 6-5/16″ × 2-1/4″
- Cord: 10 ft, in.link plug
- Overlay: included and installed
- Mounting: threaded studs with wing nuts on the back
- Works with: Gecko X and Y series spa packs
What’s in the box
One Gecko in.k300 keypad with the Pump 1 / Light / Up / Down overlay, its attached 10 ft in.link cord, and the mounting hardware. The spa pack, adapter plate and gasket are not included.
Compatibility & installation
With the spa powered off at the breaker, unplug the old keypad’s in.link plug from the spa pack, remove the old keypad from the spa’s lip, and route the new cord the same way. Seat the keypad in the cutout, tighten the wing nuts by hand, and plug it into the spa pack’s keypad connector. If your old keypad’s cutout is bigger than the in.k300, the in.k300 adapter plate covers the extra opening.
Replacement information
Gecko part number 0607-008039. Also listed as K300, K-300, BDLK3001OP, 3-00-7258, GK0607008039 and 390531.
Related parts
- Gecko in.k300 Topside Control – 2-Pump (Pump 1 / Pump 2 / Light / Temp)
- Gecko in.k300 Overlay – Pump 1 / Light / Up / Down
- Gecko in.k300 Adapter Plate – 8-1/2″ × 4″
- Gecko in.yj-3 Spa Pack Kit with in.k300 Topside
*Manufacturer reserves the right to make production changes in color and overlay design. Actual product received may vary slightly but the functionality remains the same.
✅ Not Sure It Fits? Verify Before Ordering
Send clear photos of your current keypad (front, showing the buttons), the label on your spa pack, and a tape measure across the keypad face, and we’ll confirm the correct replacement before you order.
It fits Gecko X and Y series spa packs (in.ye, in.yj, in.yt) that use a one-pump in.k300 layout: Pump 1, Light, Up and Down. Match Gecko part number 0607-008039 on the back of your old keypad, or send us photos through the fit-check form above and we’ll confirm before you order.
Yes. We only sell complete topside kits, and this one arrives with the Pump 1 / Light / Up / Down overlay already installed, ready to plug in.
No. This is the one-pump version. For a two-pump layout (Pump 1, Pump 2, Light, Temp), order the 2-pump in.k300 kit.
Yes. If your keypad works and only the printed overlay is worn, order the Pump 1 / Light / Up / Down overlay by itself.
The cord is 10 ft and ends in Gecko’s in.link plug, which plugs directly into the keypad connector on Gecko X and Y series spa packs.
Yes. With the spa off at the breaker, unplug the old keypad from the spa pack, mount the new one with the wing nuts on the back, and plug it in. No special tools are needed.
Gecko 0607-008039. It is also sold as K300, K-300, BDLK3001OP, 3-00-7258, GK0607008039 and 390531.
Orders ship from our parts warehouse partners, and orders over $99 ship free in the lower 48. Want the fit confirmed first? Use the fit-check form above.
0607-008039 0607008039 58-337-1606 0607-008039 390531 BDLK3001OP 3-00-7258 GK0607008039 K300 K-300 in.k300-1OP IN.K300-1OP 9916-101499 0607-008036 0607008036 58-337-1588 gecko gecko in.k300 topside control – 4 button, pump 1/light/up/down, with overlay, 10 ft cord gecko in.k300 keypad spaside control









Reviews
There are no reviews yet.