Genuine Balboa VL401 Topside Control for Viking Spas — 4 Button (Jet · Jet · Temp · Light)
This is the complete replacement panel for Viking Spas running a Balboa VS-series system: the genuine Balboa VL401 duplex LCD topside control plus the matching Jet / Jet / Temp / Light overlay (Balboa 80-11671), ready to install.
How to know this is your panel
Match three things: a 4-button layout reading Jet, Jet, Temp, Light, an LCD display, and an 8-pin phone-style (RJ45) plug on the cord. The rectangular panel face measures 6-3/8″ × 2-1/4″ and the cord is 7 ft. It plugs into Balboa VS-series spa packs — including the VS501Z, VS511Z, and VS510/513Z systems used in Viking Spas. Not sure? Send us a photo and we’ll confirm before it ships.34-54251-K 54251 34-54251 VL401 VL-401 80-11671 VS501Z VS511Z VS510Z VS513Z CS6200B ES6200B CS6220B ES6220B CS6230B ES6230B
What’s in the box
The Balboa VL401 topside control (7 ft cord, 8-pin phone-style plug) and the matching 4-button Jet/Jet/Temp/Light overlay.
Easy to install: with the spa powered off, unplug the old panel from the circuit board, plug in the new one, and apply the overlay with its adhesive backing.
Replacing an older or larger panel? A Topside Adapter Plate is available to cover the old cutout.
✅ Not Sure It Fits? Verify Before Ordering
Send clear photos of your current control panel (front, showing the buttons), your spa pack label, and your serial number sticker and we’ll confirm the correct replacement control before you order.
Viking Spas (and other brands) running a Balboa VS-series spa pack with the 8-pin phone-style topside plug — including the VS501Z, VS511Z, and VS510/513Z systems. We confirm the exact fit from a photo of your panel and spa pack label before it ships.
Yes — the matching Jet / Jet / Temp / Light overlay (Balboa 80-11671) is included, so the panel arrives ready to install.
Yes — a genuine Balboa Water Group VL401 duplex LCD topside control, the same platform Viking Spas used at the factory with their Balboa VS systems.
Yes. If your old cutout is larger than the VL401’s 6-3/8″ × 2-1/4″ footprint, add the Topside Adapter Plate to cover the old opening for a clean finished look.
Yes. With the spa powered off, unplug the old control from the circuit board, plug in the new one’s 8-pin phone-style connector, and apply the overlay. No special tools required.
Reviews
There are no reviews yet.