MinnSpas | EZHotTubParts.com

Viking Spas Heater 5.5kw – Titanium – Balboa

$299.99

Which Control System Is In Your Viking Spa?VKV-501 (1 Pump) VKV-502 (2 Pump)
Choose Your Heater — VKV-501 (1 Pump)Heater 4.0kW Heater 4.0kW - Titanium Heater 5.5kW Heater 5.5kW - Titanium
Not sure which system you have? Match your spa pack label — the model year alone does not settle it.

Genuine Balboa titanium heater assembly for Viking Spas — 5.5kW @ 240V / 1.5kW @ 120V, M7 sensors and split nuts included, Plug’N’Click connector. Fits Balboa BP, VS, GL, and EL systems.

✔ Titanium element ✔ M7 sensors included ✔ Fitment confirmed before it ships

- +
⭐⭐⭐⭐⭐ 4.9/5 Google Rating
Guaranteed Safe Checkout

Genuine Balboa 5.5kW Titanium Heater for Viking Spas

This is the genuine Balboa replacement heater for Viking Spas: a flow-thru heater assembly rated 5.5kW at 240V (1.5kW at 120V) with a corrosion-resistant titanium element and Balboa’s Plug’N’Click male connector — a drop-in replacement for Balboa BP, VS, GL, and EL systems.G7532 G-7532 VK-HZ-G7532 5.5kw titanium heater M7

What’s in the box

The heater assembly DOES include M7 sensors and split nuts, but DOES NOT include tailpieces or gaskets.

ProTip: always replace both heater gaskets when replacing the heater — old, compressed gaskets are the most common cause of drips after a heater swap.

✅ Not Sure It Fits? Verify Before Ordering

Send clear photos of your spa pack label, your current heater assembly, and your serial number sticker and we’ll confirm the correct replacement heater before you order.


Balboa BP, VS, GL, and EL spa packs — including the Balboa systems used in Viking Spas. It connects with Balboa’s Plug’N’Click male connector. We confirm the exact fit from a photo of your spa pack label before it ships.

Yes — the element is dual-rated: 5.5kW on a 240V hookup and 1.5kW on 120V. It heats on either; a 240V connection just heats considerably faster.

Yes — the M7 sensors and split nuts come installed on the assembly. Tailpieces and gaskets are not included, so reuse your tailpieces and order fresh gaskets.

Titanium resists corrosion and chemical damage far better than a standard element — the best choice for salt systems, high-use spas, or anyone who has burned out a standard heater before.

We strongly recommend it. Gaskets compress and take a set over time, and reusing them is the most common cause of leaks after a heater replacement. Grab a pair of heater gaskets with your order.

A comfortable DIY job: shut power off at the breaker, close the slice valves (or drain below the heater), swap the assembly with new gaskets, then check for leaks before restoring power. If you’re not comfortable working around spa wiring, have a spa tech handle it.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Shopping Cart
Scroll to Top