MinnSpas | EZHotTubParts.com
Gecko Aqua-Flo XP2E 05725016-2 Replacement Pump
,

Gecko Aqua-Flo XP2E 05725016-2 Replacement Pump

$499.97

Replacement pump for compatible spas using obsolete Gecko Aqua-Flo XP2E part number 05725016-2. Modern replacement is Gecko Aqua-Flo part number 05320761-2040, a 2-speed 230V 56-frame XP2E pump rated at approximately 9.0A high speed / 3.3A low speed with 2″ intake and discharge plumbing.

This replacement pump is commonly used to replace older 1-speed XP2E pumps such as 05725016-2. In most 1-speed applications, the replacement 2-speed pump can be wired for high-speed operation only using high speed and common.

Need help confirming fitment? Use the verification form below.

✅ Verify Part Fitment Before Ordering

Hot tub part fitment can vary by spa brand, model, year, serial number, control system, and part revision.

To help us identify the correct replacement part, please send clear photos of your existing part label, spa serial number sticker, and any related equipment area if accessible.

EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.


- +
⭐⭐⭐⭐⭐ 4.9/5 Google Rating
Guaranteed Safe Checkout
Categories: ,

Gecko / Aqua-Flo Obsolete Part Number: 05725016-2

The Gecko Aqua-Flo XP2E 05725016-2 Replacement Pump is a modern replacement for compatible hot tubs using discontinued Gecko / Aqua-Flo part number 05725016-2. The current replacement pump is Gecko Aqua-Flo part number 05320761-2040, a 2-speed, 230-volt, 56-frame XP2E jet pump with 2″ intake and 2″ discharge plumbing connections, rated at approximately 9.0 amps on high speed and 3.3 amps on low speed.

This pump is commonly used in select Bullfrog Spas, including certain Bullfrog X7 hot tubs, and may also fit many other spa brands using compatible Gecko / Aqua-Flo XP2E pump configurations.

The original 05725016-2 pump was commonly configured as a 1-speed pump. Since the original pump is obsolete, the modern replacement is now a 2-speed pump. In most 1-speed applications, the replacement pump can be wired for high-speed operation only by using the high-speed and common wires while leaving low speed unused.

Common symptoms of a failing spa pump include humming without starting, weak jet pressure, tripped breakers, loud bearings, leaking seals, overheating, or complete pump failure.

You will typically reuse your existing pump cord if it is in good condition and compatible with your spa control system. If your cord is damaged or missing, a replacement pump cord may be required and is sold separately.

EZ’s Pro Tip: Replace the pump gaskets whenever replacing a spa pump to help prevent leaks during installation — 2″ Flat Pump Gasket

Important: When replacing a spa pump, always match voltage, amperage, frame size, plumbing size, discharge orientation, and speed configuration. Horsepower (HP) ratings are often marketed inconsistently by manufacturers and sellers. Always compare amperage and electrical specifications first to avoid poor performance, nuisance breaker trips, or electrical issues.

Alternate / Replacement Part Numbers

This Gecko Aqua-Flo XP2E replacement pump may also replace many additional OEM, distributor, and private-label part numbers including (but not limited to):

Common Alternate Part Numbers:
05320761-2040, 05320761-2000, 05320761-2041, 34-402-5250, PRC9089X, AF053207612040, 05220737-2000, 05220400-7040, 05315761-2040, 05725016-2

Additional alternate part numbers may apply. Always verify pump voltage, amperage, frame size, plumbing size, and wet-end orientation before ordering.

Frequently Asked Questions

This pump replaces obsolete Gecko / Aqua-Flo XP2E part number 05725016-2. The current replacement pump is 05320761-2040.

Yes. The original 05725016-2 pump is obsolete and no longer manufactured. This replacement pump is the current modern replacement for compatible applications.

This is a 2-speed 230V pump. Many original 05725016-2 pumps were 1-speed. In most replacement situations, this 2-speed pump can be wired for 1-speed operation using the high-speed circuit only.

This pump is commonly used in select Bullfrog Spas, including certain Bullfrog X7 models. Always verify your original pump label, spa serial number, and plumbing configuration before ordering.

Depending on the seller, you may see this pump marketed as either 2 HP or 2.5 HP. Horsepower ratings are often inconsistent in the spa industry. Matching voltage, amperage, frame size, and wet end configuration is more important than relying on advertised horsepower alone.

This pump uses 2-inch intake and 2-inch discharge plumbing with standard XP2E-style union connections. The union thread outer diameter is approximately 3-1/16 inches.

In many cases, yes. If your existing pump cord is in good condition and compatible with your control system, you can typically reuse it. Replace damaged or incorrect cords.

Yes. Old flattened gaskets are one of the most common causes of leaks after pump replacement. EZ Hot Tub Parts recommends installing new gaskets whenever replacing a spa pump.

Compare your original pump label for 05725016-2 and verify voltage, frame size, plumbing size, discharge orientation, and cord style. If unsure, contact EZ Hot Tub Parts with photos of your pump label and spa serial number before ordering.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Related products

Shopping Cart
Scroll to Top