MinnSpas | EZHotTubParts.com

Cal Spas CS9800 Control Box & 5.5kW Titanium Heater – Circuit Board Replacement

$991.98

Discontinued Cal Spas CS9800 circuit board EL8000 M3

Discontinued OEM PartCS9800 circuit board (board only)
Cal Spas CS9800P3T control box with 5.5kW titanium heater ELE09018206

Genuine Cal Spas Replacement – This Is What ShipsComplete CS9800P3T control box with 5.5kW titanium heater
Important Product UpdateThe CS9800 circuit board is no longer sold by itself.
Cal Spas now supplies it only as a complete control box: the board already mounted in its enclosure with a new 5.5kW titanium heater. It replaces the whole control box on any CS9800 system. The topside control panel is not included.

Key Specs: 240V · 5.5kW titanium heater · Balboa EL-series board · Genuine Cal Spas

Not sure if this is the correct control box?
Send us a photo of your control box label before ordering — we’ll confirm compatibility.

Free Shipping on parts, filters, and chemicals orders over $99

- +
⭐⭐⭐⭐⭐ 4.9/5 Google Rating
Guaranteed Safe Checkout

Cal Spas CS9800 Control Box & 5.5kW Titanium Heater – Circuit Board Replacement

Why does this page sell a whole control box?

The Cal Spas CS9800 circuit board is discontinued as a separate part. When a CS9800 board fails today, the genuine Cal Spas replacement is the complete CS9800P3T control box: a new board, already installed in its enclosure, with a new 5.5kW titanium heater. You replace the whole box instead of swapping the board alone, so you also get a fresh heater.

What’s in the box

  • Complete Cal Spas CS9800P3T control box (enclosure with the circuit board installed)
  • 5.5kW titanium heater assembly, attached to the box

Not included: the topside control panel, pumps, blower, lights, and the supply wiring from your breaker. Your existing equipment connects to the new box.

Compatibility & Installation

  • Replaces the complete control box on Cal Spas hot tubs that use a CS9800 system.
  • Match your old box by its label. If it reads CS9800, CS9800P3 or EL8000 M3, this is the replacement. If you can’t read the label, send us a photo.
  • 240V hot tub supply. Turn off the breaker before opening the equipment area. Have a qualified electrician or spa technician install it if you aren’t comfortable with 240V wiring.
  • Photograph the old box’s connections before you unplug anything, then move each pump, blower, light and topside connection to the same place on the new box.
  • Fill the spa and bleed the air out of the heater before powering up. Never run the heater dry.

Common Symptoms of a Failed CS9800 Board

  • Blank or frozen topside display
  • Spa won’t heat, or heater error codes that come back after a reset
  • Pumps or lights that won’t turn on from the topside
  • Burn marks, a melted connector or a burnt smell on the board

Related Parts

✅ Not Sure It Fits? Verify Before Ordering

Hot tub part compatibility can vary by spa brand, model, year, serial number, control system, and part revision.

To help us identify the correct replacement part, please send clear photos of:

  • Your existing part label or sticker
  • Your spa serial number sticker
  • The equipment area or installation location (if accessible)

EZ Hot Tub Parts can help confirm fitment before you order and help reduce costly returns.


Frequently Asked Questions

No. The CS9800 board is discontinued as a separate part. Cal Spas now supplies it only inside the complete CS9800P3T control box (Cal Spas part ELE09018206), which is what this listing ships.

Yes. The CS9800P3T control box replaces the whole control box on any Cal Spas CS9800 system, including boxes labeled CS9800, CS9800P3 or EL8000 M3. Send us a photo of your label if you want us to double-check.

Yes. A new 5.5kW titanium heater comes attached to the control box. If only your heater failed and the board works, you need the Cal Spas 5.5kW titanium heater instead.

No. The topside is sold separately, and your existing topside connects to the new box. If your topside is also damaged, send us a photo and we’ll find the matching panel.

If you’re comfortable with 240V wiring, yes: turn off the breaker, photograph the old connections, move each one to the same place on the new box, then fill and bleed the spa before powering up. Otherwise, have a qualified electrician or spa technician install it.

Yes. This is the genuine Cal Spas control box, part number ELE09018206, with a Balboa EL-series board inside.

 

CS9800 CS9800P3 CS9800P3T CS9800PS ELE09018206 EL8000 M3 el8000m3 G1152

Weight 12 lbs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart
Scroll to Top