Gecko Jet Pump – 2 Speed – 230v – 12amp – 56 Frame 2″ Intake/Discharge – 2 year warranty

Gecko Jet Pump – 2 Speed – 230V – 12 Amp – 56 Frame – 2″ Intake/Discharge

Restore strong jet performance in your hot tub with this Gecko 2-speed 230V spa jet pump.
Built with a 56-frame motor and standard 2″ plumbing connections, this pump provides
reliable circulation on low speed and powerful jet pressure on high speed.

Designed as a replacement pump for many hot tubs including Cal Spas, Bullfrog Spas, Dynasty Spas
and other spas using a 56-frame jet pump.

---

High Performance Replacement Spa Pump

This Gecko 2-speed spa jet pump delivers dependable daily operation and strong hydrotherapy performance.
With a 12 amp draw on high speed, it provides powerful jet pressure while maintaining efficient filtration
on low speed.

The pump features standard 2″ intake and discharge plumbing connections, making it compatible with
many modern hot tubs using common spa plumbing sizes.

This pump is commonly used as a replacement when the original pump becomes noisy, stops starting, leaks,
or no longer provides proper jet pressure.

---

Specifications

• Pump Type: Spa Jet Pump
• Speed: 2 Speed (Low / High)
• Voltage: 230V
• Amperage: 12 Amps (High Speed)
• Motor Frame: 56 Frame
• Plumbing Connections: 2″ Intake / 2″ Discharge
• Application: Hot Tubs and Spas
• Warranty: 2 Year Manufacturer Warranty

---

Common Signs Your Spa Pump Needs Replacement

• Pump hums but will not start
• Loud grinding or bearing noise
• Weak jet pressure
• Pump leaking from the shaft seal
• Breaker trips when pump starts
• Motor overheating or shutting down

---

Compatibility

This pump is commonly used in many hot tubs including:

• Cal Spas
• Bullfrog Spas
• Dynasty Spas
• Other spas using 56-frame 2-speed jet pumps

Always confirm the following before ordering:

• Voltage (230V)
• Amperage
• Frame size
• Plumbing connection size

---

EZ’s Pro Tip

Replace Pump Gaskets When Installing a New Pump

When installing a new spa pump or motor assembly, it is best practice to install
pump union gaskets to prevent leaks.

This pump uses standard 2″ flat pump gaskets.

👉 Recommended: 2″ Flat Pump Gasket

Replacing the gasket is inexpensive insurance against leaks and helps ensure a proper
seal when reconnecting the plumbing.

---

Match Amperage — Not Horsepower

When replacing a spa pump, always match the amperage rating of the original pump.

Horsepower (HP) and Brake Horsepower (BHP) numbers are often used by marketing departments
and can be inconsistent between manufacturers.

For example, the same 12-amp spa pump may be labeled as:

• 2.5 HP
• 3 HP
• 5 HP
• 6 BHP

These labels do not necessarily reflect the true electrical load or performance.

The most reliable specification to match is the pump’s amperage rating. Installing
a pump with higher amperage than your spa is designed for can:

• Overload wiring
• Trip breakers
• Damage spa control systems
• Create a potential fire risk

Always confirm voltage, amperage, frame size, and plumbing size when selecting
a replacement spa pump.

---

Need Help Confirming Fitment?

If you’re unsure whether this pump fits your spa, contact us with:

• A photo of your current pump label
• Your spa make and model

Our technicians can help confirm compatibility before ordering.